Page 1
INDUSTRIAL WATER CHILLER USER MANUAL MODEL: CW-3000 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Warning-To reduce the risk of injury, user must read instructions manual carefully. CW-3000 refrigerator is designed according to the international advanced cooling system, suitable for laser engraving machine, CNC engraving machine, etc. FUNCTIONS AND FEATURES 1. The integrated water spray sealed water tank can be used without dust...
The circulating water of the water cooler must use a sealed container for normal use, such as laser tube cooling water. Unsealed containers cannot circulate, such as water basins, buckets cannot be used for circulating water cooling with water coolers. SPECIFICATIONS Model CW-3000 voltage AC220-240V AC120V frequency 50Hz...
Page 6
PROCEDURE Installing this industrial chiller is very simple. The first installation of a new machine can be carried out by following these steps: ①.OPEN THE PACKAGE TO CHECK IF THE MACHINE IS FIXED AND ALL NECESSARY ACCESSORIES ARE COMPLETE. ②.OPEN THE WATER SUPPLY INLET TO SUPPLY COOLING WATER (DON'T SPILL THE WATER OUT!).
Page 7
FLOW ALARM AND OUTPUT PORTS In order to ensure that the equipment will not be damaged when the cooling water circulation is out of control, the CW-3000/3000Pro series chillers have low flow alarm protection. 1. FLOW ALARM OUTPUT PORT AND WIRING DIAGRAM 2.
Note: The flow alarm is connected to the normally open relay and the normally closed relay contact, and the working current is required to be less than 5A and the working voltage is less than 300V. SIMPLE TROUBLESHOOTING FAULT CAUSE OF THE FAILURE RESOLUTION Check to make sure the power The power cord is not...
Flow alarm (red light Check the water level gauge display. on the panel) Use The water level storage tank Add water to the level shown in the the water pipes is too low green area: and check the water directly circulation pipe for leaks.
Page 10
Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. EC REP: E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. UK REP: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd.
Page 12
Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the CW-3000 and is the answer not in the manual?
Questions and answers