Graco A Series Instructions And Parts List
  1. Manuals
  2. Brands
  3. Graco Manuals
  4. Paint Sprayer
  5. Series A
  6. Instructions and parts list
Graco A Series Instructions And Parts List

Graco A Series Instructions And Parts List

Airless spray gun
Hide thumbs Also See for A Series:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

INSTRUCTIONS-PARTS LIST.
AIRLESS SPRAY GUN
psi
MAXIMUM WORKING PRESSURE
bar)
I
Hazard of Using Fluids Containing Halogenated Hydrocarbons
Never use 1.1.1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing
such solvents in this equipment. Such use could result in a serious chemical reaction, with the possibility of explo-
sion, which could cause death, Serious bodily injury andfor substantial property damage.
Consult your fluid suppliers to ensure that the fluids being used are compatible with aluminum and zinc parts.
manual
This
contains IMPORTANT
and
WARNINGS
INSTRUCTIONS
READ AND RETAIN FOR REFERENCE
WARNING
Rev
F
SUPERSEDES E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A Series and is the answer not in the manual?

Questions and answers

Related Manuals for Graco A Series

Summary of Contents for Graco A Series

  • Page 1 INSTRUCTIONS-PARTS LIST. SUPERSEDES E manual This contains IMPORTANT WARNINGS INSTRUCTIONS READ AND RETAIN FOR REFERENCE AIRLESS SPRAY GUN MAXIMUM WORKING PRESSURE bar) WARNING Hazard of Using Fluids Containing Halogenated Hydrocarbons Never use 1.1.1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in this equipment.
  • Page 2 HIGH PRESSURE SPRAY CAN CAUSE SERIOUS INJURY. FOR PROFESSIONAL USE ONLY. OBSERVE ALL WARNINGS. Read and understand all instruction manuals before operating equipment. FLUID INJECTION HAZARD Safety S p r a y S a f e t y G e n e r a l Use extreme cautlon when cleaning or changing spray tips.
  • Page 3 NOT expose Graco hose to temperatures above FLUID HOSES MUST HAVE SPRING GUARDS O N H o s e G r o u n d i n g C o n t i n u i t y...

  • Page 4: Installation

    INSTALLATION NOTE: Numbers and letters in parentheses in the text correspond to the reference numbers and letters in the drawings and parts list. W A R N I N G Be sure your system has a bleed-type master air valve (pneumatic pumps only) and a fluid drain valve.
  • Page 5 Adjust the Spray Pattern 1. To adjust the spray pattern direction, follow the Pressure Relief Procedure on page Engage the safety latch and loosen the tip guard retaining nut. Turn the tip guardltip groove is horizontal for a horizontal spray pattern, and vertical for a vertical pattern.
  • Page 6 SERVICE Adjusting the Needle (See Fig 5) WARNING Proper adjustment of the needle is essential to be the skin, or injury from moving parts or electric sure the trigger safety latch makes the gun in- operative when engaged. Improper adjustment may allow the gun to be triggered.

  • Page 7: Parts Drawing

    PARTS DRAWING REF NO. Model 217-593, Model Series Series 1 to Includes items 4 t o 41 includes items PART DESCRIPTION PART DESCRIPTION RETAINER, spring (color coded 179-957 GASKET, sleeve 220-251 TIP GUARD CAP, end NEEDLE, fluid 5/16-18 x 318" LOCKNUT;...

  • Page 8: Service Information

    Graco equipment of structures, accessories, aquip- caused This warranty is conditioned upon tha prepaid return of the equipment claimed to be dafectiva for axamination by Graco to verify tha claimed defect. If tha claimed defect is verified, Graco...

This manual is also suitable for:

C series220-955217-593

Table of Contents