SNOWJOE SHOVELUTION SJ-SHLV20 Manual

SHOVELUTION
HANDLE IS SPRING LOADED UNDER HEAVY TENSION.
To avoid injury, securely grasp handle before cutting zip ties.
TO ASSEMBLE:
1. Depress the small button at the end of the lower
pole, push and insert the lower pole into the poly
blade unit until it snaps securely into place.
2. Remove the knob and the bolt from the upper pole.
3. Insert the top of the lower pole into the upper pole.
4. Align bolt holes, insert the bolt into the square hole,
through pole.
5. Tighten with the knob.
TO DISASSEMBLE:
Follow instructions above in reverse order.
FOR STORAGE:
Make a loop with the retaining strap around
the spring-loaded handle, and with the other
end, secure to knob on the upper pole.
If you have any questions or comments,
please call the Snow Joe
1-866-SNOWJOE (1-866-766-9563)
© 2022 by Snow Joe , LLC
®
All rights reserved. Original instructions.
20-INCH | STRAIN-REDUCING
m CAUTION!
Then, remove retaining strap and save for later storage.
+ Sun Joe customer service department at:
® ®
SNOW SHOVEL
®
Model SJ-SHLV20
poly blade
Form No. SJ-SJ-SHLV20-880E-MR1
upper
knob
lower
pole
unit
SAVE THESE INSTRUCTIONS
EN
pole
bolt