Download Print this page
SNOWJOE Ultra SJ619E Operator's Manual

SNOWJOE Ultra SJ619E Operator's Manual

Electric snow thrower
Hide thumbs Also See for Ultra SJ619E:

Advertisement

Quick Links

A Division of Snow Joe
, LLC
®
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Any electrical appliance can be dangerous if used incorrectly.
Some of the safety precautions given in this manual apply
generally to many appliances. Other warnings are specific
to the use of this snow thrower. Keep this manual for future
reference.
General Safety WARNINGS!
You and any other operator of this snow thrower must read,
understand, and follow these instructions in their entirety, and
should reread them at the start of each snow season. Failure
to follow these instructions may result in ELECTRIC SHOCK,
FIRE, and/or serious PERSONAL INJURY.
Notice the personal safety alert symbol
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and
AWARENESS.
1. Keep work area clean and well lit. Cluttered, dark areas
invite accidents.
2. Do not operate the snow thrower in an explosive
atmosphere, such as in the presence of flammable
liquids, gases, or dust. Electrical appliances create sparks
that may ignite the dust or fumes.
3. Keep children, pets, and bystanders away from the
work area. Be aware that the normal noise of the
machine when turned on may make it difficult for you to
hear approaching people. Spectators should wear safety
glasses and be kept a safe distance away from the work
area. Do not let spectators touch the snow thrower or the
extension cord.
4. Electrical plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
grounded appliances. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
5. Avoid body contact with earthed or grounded surfaces
(i.e. upper and lower water pipes, radiators, ranges,
refrigerators, microwave ovens, and outer frames of
heating equipment). Take necessary precautions to avoid
electric shock. There is an increased risk of electric shock
if your body is earthed or grounded.
© 2015 by Snow Joe
, LLC
®
All rights reserved. Original instructions.
18-INCH 14.5-AMP ELECTRIC SNOW THROWER
Model SJ619E
m
used in this
1
6. Do not abuse the cord. Keep the cord away from heat,
oil, sharp edges, or moving parts. Never carry the snow
thrower by its cord or yank the cord to disconnect it from
the electrical outlet. Damaged or entangled cords increase
the risk of electric shock.
7. Replace or properly repair damaged cords. If the cord
becomes damaged in any manner while plugged into the
wall receptacle, immediately pull the extension cord plug
from the receptacle.
8. Contact with water while operating the snow thrower
can result in electric shock and serious bodily injury.
Do not use the snow thrower in damp or wet locations or
expose to rain. Do not handle the plug or the appliance
with wet hands or while standing in water.
m
9.
WARNING – Use outdoor extension cords marked
SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or
SJTOWA. These cords are rated for outdoor use and
reduce the risk of electric shock.
10. Turn off the power switch and disconnect the power
cable before making any adjustments to the unit and
before inspecting, servicing, changing accessories, or
cleaning the snow thrower. Follow the same procedure
if any other dangerous conditions are present during
operation. Any adjustments to the unit should be
performed after revolving parts inside the snow thrower
stop completely. Such preventative safety measures
reduce the risk of starting the power tool accidentally.
11. If you find the main power cable or the extension cable
damaged, please pull out the plug from the socket and
disconnect the power immediately. Repair the cable or
replace it if necessary.
12. When replacing any parts, you must strictly observe
the instructions and procedures described in this
operator's manual. Special care should be paid to any
rubber parts, since these parts may increase the engine
load and decrease its mechanical power if damaged.
13. Do not move or transport the snow thrower when the
plug is connected to the power socket and the switch
is turned on.
14. If, during use, you notice that the unit runs unstably
or hear abnormal sounds from the engine, stop the
machine, disconnect the power immediately and
contact an authorized Snow Joe
center.
SAVE THESE INSTRUCTIONS
Form No. SJ-SJ619E-880E-M
OPERATOR'S MANUAL
+ Sun Joe
service
®
®

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ultra SJ619E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SNOWJOE Ultra SJ619E

  • Page 1 18-INCH 14.5-AMP ELECTRIC SNOW THROWER Model SJ619E Form No. SJ-SJ619E-880E-M OPERATOR’S MANUAL A Division of Snow Joe , LLC ® IMPORTANT! 6. Do not abuse the cord. Keep the cord away from heat, oil, sharp edges, or moving parts. Never carry the snow Safety Instructions thrower by its cord or yank the cord to disconnect it from the electrical outlet.
  • Page 2 Do not use on gravel, stone, or other Visit snowjoe.com to purchase this extension cord unpaved surfaces unless the snow thrower is adjusted for online or, to order by phone, call 1-866-SNOWJOE such surfaces according to the instructions given in this (1-866-766-9563).
  • Page 3 6. Body position – Maintain proper footing and balance • Hand-held operating position – Operation of the snow at all times. Place heels firmly on the ground and tightly thrower in the hand-held position is unsafe. grasp the handle bar. Watch for uneven surfaces and do • Abnormal operation – If you notice the snow thrower not overreach.
  • Page 4 Safety Symbols The following table describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, WARNING! Do not expose the and follow all instructions in the unit to rain or wet conditions.
  • Page 5 Know Your Electric Snow Thrower Read the owner’s manual and safety rules carefully before operating your electric snow thrower. Compare the illustration below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
  • Page 6 If any damage is seen or suspected, do not assemble. Instead, contact the Snow Joe + Sun Joe customer ® ® service center at 1-866-SNOWJOE (1-866-766-9563) for assistance. Handle with care during assembly so that electrical wiring does not become damaged.
  • Page 7 Chute Crank Assembly Fig. 7 1. Remove the cotter pin from the crank rod (Fig. 4). Fig. 4 Cotter pin 3. Secure the crank rod in place with the cotter pin (Figs. 8 – 9). 2. Install the crank rod through the center plate and insert Fig.
  • Page 8 Operation Discharge Chute Assembly 1. Position the chute deflector over the discharge chute and NOTE: Before using this machine, make sure that the power align the holes, placing the washer between the deflector source you will use complies with the specifications detailed and the chute (Fig.
  • Page 9 4. Note that the snow thrower has a polarized male plug – 3. To power OFF, release the switch bar lever. one prong in the plug is slightly longer and wider than the Utilize the LED Light other (Fig. 14). The extension cord female end should be likewise polarized so that the extension cord fits snugly 1.
  • Page 10 1. Keep the area of operation free of foreign objects that can become thrown by the rotor blades. Perform a thorough Fig. 18 inspection of the area since some objects may be hidden from view by surrounding snow. If the snow thrower hits an obstruction or picks up a foreign object during use, stop the snow thrower, disconnect the extension cord, remove the obstruction, and inspect the unit for damage.
  • Page 11 1. The discharge chute can be adjusted 180 degrees by rotating the chute crank. Rotate the chute control crank WARNING clockwise to move the discharge chute to the left and counterclockwise to move the chute to the right (Fig. 19). Make sure that the chute deflector snaps and locks completely onto the discharge chute.
  • Page 12 Replacing the Scraper Bar 8. For the user's safety, worn or damaged parts must be replaced. Replace with original replacement parts only. 1. The scraper bar is located at the base of the snow thrower Parts from another snow thrower may not fit properly, beneath the rotor housing (Fig.
  • Page 13 2. Use your right hand to turn the rib side of the belt 4. Use your right hand to press the belt with the ribbed side up and pull upwards while turning the auger pulley down. While holding the belt down with your right hand, counterclockwise with your left hand.
  • Page 14 Service and Support 2. Secure the auger. Using an 18 mm hex socket, turn the pulley clockwise to remove (Fig. 31). If your Snow Joe Ultra SJ619E electric snow thrower requires ® Fig. 31 service or maintenance, please call the Snow Joe + Sun Joe ®...
  • Page 15 NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ®...
  • Page 16 NOTES...
  • Page 17 NOTES...
  • Page 18 NOTES...
  • Page 19 You can reach us at 1-866-SNOWJOE (1-866-766-9563), online or guard of your product. All products require a valid proof at snowjoe.com, via email at help@snowjoe.com or tweet us of purchase. @snowjoe.
  • Page 20 snowjoe.com...