Chapter 2
Connect to a Computer
4. Locate an available F_USB connector and carefully plug the Bluetooth USB
cable into it.
B
U S
B
U S
Note:
If the Bluetooth USB cable is not correctly connected to the motherboard, Bluetooth function won't work
even after driver installation.
5. Install the antennas to the adapter.
Tip:
• To maximize performance, make sure the path between the antenna and your router is clear.
• DO NOT connect one SMA male connector directly to another with wires or other con-ductors to prevent
short circuits or adapter damage.
6. Replace the case panel, plug in the power cable and turn on your computer.
07
Need help?
Do you have a question about the Archer TBE552E and is the answer not in the manual?