Join A Wireless Network; Pair With Bluetooth Devices - TP-Link Archer TBE552E User Manual

Chapter 3
• Bluetooth: Click
Bluetooth installation.
Note:
• To check if the drivers are installed successfully or not , refer to
drivers successfully or not?
• If an unknown publisher message pops up, select Yes to continue.
• If Windows User Account Control requires admin credentials, type user name and password of your
Windows administrator account.
3 2

Join a Wireless Network

1 Click the internet icon on the taskbar (the icon might look like one of these:
, , , or ).
2 Select your Wi-Fi network, click Connect, and enter the password when
prompted.
Note: To connect to a 6GHz, check the following:
1. Make sure the 6 GHz band is not prohibited by regulations in your country.
2. Make sure your router or access point supports 6 GHz Wi-Fi.
3. The 6 GHz band requires operating system support. Make sure you are using the Windows 11.
4. Make sure the Wi-Fi driver is successfully installed according to the Quick Installation Guide.
Note: If you want to update your operating system, refer to
3 3

Pair with Bluetooth Devices

1 Right-click the
Note: If it's not displayed, refer to
2 Select Add a Bluetooth Device to scan for available devices.
3 Select your Bluetooth device from the list and follow the on-screen
instructions to complete pairing.
Note: Make sure your device's Bluetooth is enabled and discoverable.
and follow the on-screen instructions to complete the
TP-Link_XXXX
Secured
Network settings
(Bluetooth) icon on the taskbar.
Troubleshooting-T4.
How to check if I have installed the
Connect
Troubleshooting-T6.
Use Your Adapter
10