Table of Contents
Advertisement
Chapter 3
3 1
Install Drivers
Before You Start
1. Make sure you are using Windows 11(64-bit) or above, and your Router or
Access Point supports the Wi-Fi 7 standard.
2. If you plan on using Bluetooth and already have connected Bluetooth
devices, proceed with Step 1. Otherwise, skip to Step 2.
1
Disable Bluetooth
a. Right-click My Computer, select Manage, go to Device Manager.
b. Expand the Bluetooth node to find your existing Bluetooth device.
c. Right-click the existing Bluetooth device and select Disable.
Note: Make sure you have disabled all existing Bluetooth devices (both built-in and third party).
2
Insert the CD into your computer and go to My Computer or This PC to run
the Autorun.exe.
Note: You can also check the new release and download the driver at
https://www.tp-link.com/support/download/
3
Install the Wi-Fi and Bluetooth drivers.
Note: DO NOT install the Bluetooth and Wi-Fi drivers simultaneously. If one driver is being installed,
please wait until it is finished, then install the other driver.
•
Wi-Fi: Click
installation.
Device Manager
Bluetooth
Existing Bluetooth Adapter
and follow the on-screen instructions to complete the Wi-Fi
Disable
Use Your Adapter
09
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer TBE552E and is the answer not in the manual?