To Change Temperature Setting - Frigidaire FAK104R1V - 10,000 BTU Slider Use And Care Manual

Air Conditioner Features
(continued)
TO CHANGE
TEMPERATURE SETTING:
TO ADJUST FAN SPEEDS:
TO USE AUTO FAN FEATURE:
DO THIS:
PRESS TO RAISE
PRESS TO LOWER
DO THIS:
PRESS TO SELECT:
Low,Med,or High
DO THIS:
PRESS TO SELECT:
AUTO
YOU WILL SEE:
Note: Tap or hold either up( ) or down( ) botton until the desired
temperature is seen on the display. This temperature will be
automatically maintained anywhere between 60 (16 ) and 90
(32 ). If you want the display to read the actual room temperature.
See "To Operate on on Fan Only" section on Page 6.
YOU WILL SEE:
The chosen fan speed LED will light up.
YOU WILL SEE:
Note: Fan speed starts at high and adjusts to a slower speed as
the room temperature dictates. For example, if the room doesn't
get too warm it will stay at the slowest speed. If the room
temperature rises quickly, such as a door being opened, it will
automatically go to the highest speed. The fan speeds will redjust
back to the slowest speed as the room returns to the original set
temperature. Press the Fan Speed button to adjust the fan speed
manually.
6
LIGHT On