Advertisement
Quick Links
BT8371
UNIVERSAL
MOBILE VIDEOWALL STAND
INSTALLATION GUIDE
SPECIFICATIONS
• Recommended screen size: 32"- 70"
• Max weight per screen: 50kg (110lbs)
• Suitable for landscape or portrait mounting
• Safety screws help prevent unauthorised removal of screens
• Integrated cable management
• All mounting hardware included
Note: This assembly manual covers di erent installations. Some
parts or procedures shown may not be required for installation.
Please refer to
page 5 for
VESA® xings
www.btechavmounts.com
PER SCREEN
TM
Advertisement
Related Manuals for BTECH BT8371
Summary of Contents for BTECH BT8371
- Page 1 BT8371 UNIVERSAL MOBILE VIDEOWALL STAND INSTALLATION GUIDE SPECIFICATIONS • Recommended screen size: 32”- 70" • Max weight per screen: 50kg (110lbs) • Suitable for landscape or portrait mounting • Safety screws help prevent unauthorised removal of screens • Integrated cable management •...
- Page 2 CONTENTS Installation Safety Notes........................Parts List..............................Typical Installation..........................Installation Notes........................... Installation Instructions........................8 Product Dimensions..........................23 B-Tech Contact Details........................24 INSTALLATION & OPERATING SAFETY INSTRUCTIONS CAUTION: This mount is intended for use only with the maximum weights indicated. Use with equipment heavier than the maximum indicated may result in instability causing possible injury.
- Page 3 B-Tech AV Mounts 建议本产品由专业AV安装人员或其他合格人员安装。 B-Tech AV Mounts 及它的代理商、经销商不对 由于不恰当的安装而造成的损失或伤害负责。 本产品必须安装在合适的架构上，并仅用于不超过所标示的最大承重。 Společnost B-Tech AV Mounts doporučuje provést instalaci tohoto produktu instalátora AV či jinak způsobilé osoby. Společnost B-Tech AV Mounts, její distributoři a prodejci nenesou prostřednictvím odborného odpov ědnost za škody nebo zranění...
- Page 4 BT8371 PARTS LIST Due to the multiple installations available the quantity for each option below is dependent on the mount ordered. All these components can be moved or carried by manpower. Please be careful to avoid injury when PLEASE KEEP THIS FOR FUTURE REFERENCE handling these components before &...
- Page 5 SPACER INSTALLATION TOOLS REQUIRED BT8390-SP Crosshead 10mm Spanner PART NAME ITEM screwdriver (Optional) PER PACK SPACER OPTIONAL RAIL EXTENSION KIT BT8390-EXT Knife Level ITEM PART NAME JOINING BAR M6 x 8mm GRUB SCREW 3AF HEX KEY SCREEN INTERFACE KIT Interface Arms Fixed Tilt Micro-Adjustment...
- Page 6 typical installation 2 x 2 Videowall installation with VESA 400 Micro-Adjustment arms INSTALLATION TOOLS REQUIRED Crosshead screwdriver Knife/Cutter Level (Optional) INSTALLATION notes FLOORSTAND STABILITY • Install stand on level ground • Two person assembly When verifying the stability of the structure, consider the following external factors: 1.
- Page 7 BT8371 MAX LOAD CONFIGURATIONS MAX. COLUMN HEIGHT 3.6M Wall Tie-Back Note: Screen weight must be evenly spread up the vertical column BT8380-WTB NOTE: Larger installs may require the For larger installations a BT8380-WTB use of a BT8380-WTB Wall tie-back can be used to secure the stand / column to a wall.
- Page 8 OPTIONAL EXTENDING THE COLUMNS EXTEND VERTICAL COLUMNS i. Insert item C7 halfway into the non-threaded end of item C1. The two joining bars with item C8 go in the front of the column and the 2 joining bars with item C9 go in the back. IMPORTANT: Joining bars should be inserted into the non-threaded end of...
- Page 9 OPTIONAL EXTENDING THE MOUNTING RAIL Combine Mounting Rails together using the BT8390-EXT i. On the intended front facing side of item E1 insert 4x item G1 half-way into each channel, on the back side insert 1x item G1 into the top channel and 1x item G1 into the third channel (see g.
- Page 10 INSTALLATION INSTRUCTIONS ATTACH JOINING PLATES TO COLUMNS i. On item D1, assemble 4x item D3 to item D2. ii. Lay the column on the oor and t item D1 to item C1. IMPORTANT: Make sure the end with M8 threads are at the bottom of the columns.
- Page 11 iii. Use item F1 to set the distance between items D1 on item C1 according to the screen size. Once set, tighten item D3. ADJUSTMENT KNOB Leave at least a 5mm gap at top of column for item C2.
- Page 12 INSERT SLIDING NUTS INTO MOUNTING RAILS Lay the rail on the oor and for each item D1 used, insert 4x item D2 into item E1. Two in the 2nd channel and two in the bottom channel.
- Page 13 ATTACH COLUMNS TO RAILS On the oor, place item C1 onto item E1. Attach item D1 to item E1 by fastening item D3 into the inserted items D2. Note: To ensure straight assembly of item C1 make sure the distance of items D1 to the end of item E1 are set the same on each rail.
- Page 14 ASSEMBLE BASES TO COLUMNS i. For a mobile application, unscrew item A2 on item A1 and replace with item B1 before attaching the base to the columns. Note: Ensure castors are set on the braked position for assembly. ii. On the oor, attach item A1 to the columns item C1 using items A3 & A4. Note: Once bases are xed, return stand to upright position.
- Page 15 ATTACH INTERFACE ARMS TO SCREEN Fix items H1 & H2 to the rear of the screen using items A-M. Note: Ensure the arms are A. FIXED ARMS facing the correct way round and the same holes are used on both arms. SCREEN FIXING KIT SCREEN...
- Page 16 (BT8390-VESA400MAF) C. MICRO-ADJUSTMENT ARMS Attach items H1 & H2 to the back of the screens using items A-F. Note: Ensure the arms are SCREEN FIXING KIT facing the correct way round and the same holes are used on both arms. Note: Use spacers for screens with recessed xings SCREEN SCREEN...
- Page 17 (BT8390-VESA400MAP) D. POP-OUT MICRO-ADJUSTMENT ARMS Note: Ensure the arms are i. Attach items H1 & H2 to the back of the screen using items D-I. facing the correct way round and the same holes are used on both arms. SCREEN FIXING KIT SCREEN ii.
- Page 18 MOUNT SCREEN TO RAIL i. Hook the rst screen onto bottom rail of the stand. ii. With a level, align the screen to the oor using the height A & B FIXED & TILT ARMS adjustment screws / knobs on top of the interface arms. HEIGHT ADJUSTMENT SCREW...
- Page 19 iii. Laterally adjust screen by hand. 3 x 3 Video wall installation example Lateral adjustment X axis Lateral Adjustment X axis Note: If mounting 3 or more screens across, mount the rst screen centrally onto the bottom rail. HOOK ON THE REMAINING SCREENS After mounting each screen use the Y &...
- Page 20 Using a level, align the screen to the oor using the Y axis adjustment knobs. Use the Z axis knobs to ensure the screen is perpendicular with the oor. HEIGHT ADJUSTMENT Y AXIS KNOB DEPTH ADJUSTMENT Z AXIS KNOB DEPTH ADJUSTMENT Z AXIS KNOB Lateral Adjustment...
- Page 21 SECURE SCREENS Once screens are aligned, tighten the safety screws on the bottom of items H1 & H2. SAFETY SAFETY SCREW SCREW SERVICING SCREENS (POP-OUT ARMS ONLY) Items H1 & H2 Push centrally at the left and right of the screen popped-out to pop-out the mount.
- Page 22 ADD END CAPS AND COVERS i. After screen cables are connected and routed down the back of item C1, partially clip on the cable management item C3, this allows easy removal if more cables need adding. Once satis ed all cables are tted, clip the covers on fully. ii.
- Page 23 BT8371 DIMENSIONS Depending on installation requirements, the BT8371 Mobile Videowall Stand will feature a selection of the following products. PLEASE KEEP THIS FOR FUTURE REFERENCE INTERFACE ARMS BASE BT8380-BASE BT8390-VESA200F BT8390-VESA200T BT8390-VESA400F BT8390-VESA400T 950mm 222mm Ø100mm 793.5mm With Castors 86mm...
- Page 24 All other brands and product names are trademarks of their respective owners. Photographs are for illustrative purposes only. E&OE. Manufactured by: B-Tech International Ltd Bennett House, Long March, Daventry, Northamptonshire, NN11 4NR, UK B-Tech Pro-AV BVBA Brixtonlaan 32, Zaventem 1930, Brussels, Belgium AMA-BT8371-V1.1-0821-BTECH MADE IN VIETNAM For More Information Visit www.btechavmounts.com...
Need help?
Do you have a question about the BT8371 and is the answer not in the manual?
Questions and answers