Short-Circuit Protectio - fischertechnik RX CONTROLLER Operating Instructions Manual

Table of Contents

RX CONTROLLER

Select Bluetooth and click on „Connect"

•

Press the red Bluetooth button on the RX Controller, RX Controller is displayed and can be

•

selected. There must be no USB connection!

Note: the displayed designation of the RX controller (e.g. RXC85f0) corresponds to the

designation on the white label on the side of the controller. This allows the controller to be

clearly identifi ed.

•

The connection is established, the connection icon lights up green

The LED on the RX Controller fl ashes rapidly in blue

SHORT-CIRCUIT PROTECTION

All connections of the RX Controller are protected against short circuits. If there is a short circuit

at a motor output, it is switched off. As soon as the short circuit has been eliminated, the motor

can be switched on again. If there is a short circuit at the „9V Out" connection, the RX Controller

is switched off. As soon as the short circuit has been eliminated, the device can be switched on

again.

Table of Contents

Need help?

Do you have a question about the RX CONTROLLER and is the answer not in the manual?