Tektronix 067-0599-00 Instruction Manual page 18

Calibration—067-0599-00
Table 4-1
LIST OF TEST EQUIPMENT REQUIREMENTS
Description Performance Requirements Application
Examples
Oscilloscope Bandwidth, dc to 1 MHz; minimum Pulse adjustments.
deflection factor, 1 mV/div; sweep
rate, 1 ms/div.
TEKTRONIX 5110,
Oscilloscope with
5A13N Amplifier, and
5B10N Time Base
DC input impedance =10,000 MQ
FLUKE 8500A
w/Option 02
130 V, current range to 3.2 A, and
"power to 305 W.
used in the oscilloscope.
Probe
Xcelite R3323
e. Preadjust +10 V
3. Check Emitter Current resistor accuracies
8. Check 10 V Reference:
4. Check Vertical Current resistor accuracies
a. Setup
6. Check Step Generator Loads:
1K: 1 kQ, w;ithin 0.5%
40 V LOAD: 3.88 k, within 1%
10: 0.1 Q, within 3%.
1K
+ 18K: 19 kQ, within 5%
a. Setup
b. +1.25 V, within 0.5%
c. +2.5 V, within 0.5%
d. +6.25 V, within 0.5%
Within 0.04%
4-2
9. Check Vertical Balance accuracy:
10. Check Emitter Current Supplies: