ZiLOG Z8 Encore! XP Series Quick Start Manual page 4

Z8 Encore! XP
Quick Start Guide
Page 4
Serial
Serial Port
Smart
Cable
For convenience, you can leave the adapter slot cover in place and plug in a standard com-
puter equipment AC power cord (purchased separately) between the AC cord receptacle
on the end of the power supply and an electrical outlet.
Installing the ZDS II–Z8 Encore!
Perform the following steps to install the software tools:
1. Load the ZDS II CD into the CD-ROM drive of the host PC. The CD launches
DemoShield automatically and provides a menu to install the product and
documentation.
2. Select
INSTALL PRODUCTS
Wizard.
3. Click
Next
Installing the ZDS II–Z8 Encore!
Downloaded from Elcodis.com electronic components distributor
®
Development Kits
Development
Board
P2
Figure 1. Development Board External Connections
(Serial Z8 Encore! Smart Cable shown)
, and then
to continue with the installation. The License Agreement appears.
®
Software
Universal
Power Supply
J1
®
Software
INSTALL ZDS II
Host PC
To Electrical
Outlet
Adapter
Slot
AC Cord
Receptacle
to display the Installation
QS004303-0205