Download Print this page
Qtx Double Bubble LED User Manual
Qtx Double Bubble LED User Manual

Qtx Double Bubble LED User Manual

Advertisement

Quick Links

Double Bubble LED
Bubble Machine
Item ref: 160.552UK
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Thank you for choosing the Double Bubble LED bubble machine as part of your stage effects setup. This
machine is a high output, compact model and will provide consistent large area coverage. Please read and
keep this manual to ensure maximum performance and avoid damage through misuse.
Unpacking
Your Double Bubble LED should reach you in good condition and should be supplied with IEC mains lead(s), a
wired remote-control sensor and keyfob remote. If there are any signs of damage or items missing from the
packaging, contact your dealer immediately.
Warning
To prevent risk of fire or electric shock, do not expose electrical parts to rain or moisture.
If liquids are spilled on the housing or through the vents, disconnect the mains, allow the unit to dry out and
have it checked by qualified personnel before further use. Avoid any impact, dropping or extreme pressure to
www.avsl.com
160.552UK Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the Double Bubble LED and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Qtx Double Bubble LED

  • Page 1 Unpacking Your Double Bubble LED should reach you in good condition and should be supplied with IEC mains lead(s), a wired remote-control sensor and keyfob remote. If there are any signs of damage or items missing from the packaging, contact your dealer immediately.
  • Page 2 Placement The Double Bubble LED has an upright fluid tank and should always be operated in an upright position. Choose a position where the bubble output is facing the area to be filled. Ensure easy access to the rear panel and to the bubble fluid tank for refilling and cleaning.
  • Page 3 Operation The Double Bubble LED has 2 operating modes accessed using the On/Off rocker switch on the back of the unit. Set the rocker switch to the On position for a constant flow of bubbles and LED light show. Set the switch to the Off position to control the bubble flow and light show using the wireless remote control.

This manual is also suitable for:

160.552uk