IMPORTANT: READ THESE INSTRUCTIONS AND ALL WARNINGS PRIOR TO USING THIS EQUIPMENT.
UNDERSTAND
ALL
REQUIREMENTS. FAILURE TO DO SO COULD CAUSE AN ACCIDENT RESULTING IN SERIOUS OR
FATAL INJURY AND/OR PERSONAL PROPERTY DAMAGE.
The use of portable automotive lifting devices is subject to certain hazards that cannot be prevented by mechanical means,
but only by exercise of intelligence, care, and common sense. It is therefore essential to have personnel involved in the use
and operation of equipment who are careful, competent, trained, and qualified in the safe operation of this equipment and its
proper use when servicing motor vehicles and their components. Examples of hazards are dropping, tipping, or slipping of
motor vehicles or their components caused primarily by improperly securing loads, overloading, off-centered loads, use on
other than hard level surfaces, and using equipment for a purpose for which it was not designed.
The owner and / or operator shall study and understand the product and safety instructions before operating this equipment.
Safety information shall be emphasized and understood. If the operator is not fluent in English, the product and safety
instructions shall be read to and discussed with the operator in the operator's native language by the purchaser / owner or
his designee, making sure that the operator comprehends their contents. A copy of these instructions / warnings shall
be retained for future reference.
Visual inspection shall be made before each use of this equipment, checking for abnormal conditions, such as cracked
welds, leaks, damaged, loose or missing parts. This equipment shall be removed immediately from service if it is believed to
have been subjected to an abnormal or shock load, the equipment shall be inspected by a qualified repair facility. Owners
and / or operators should be aware that repair of this equipment may require specialized knowledge and facilities. It is
recommended that this equipment be inspected annually by a qualified repair facility. Defective parts, decals, safety labels
or signs should be replaced with AFF specified parts.
WARNING
•
Prior to lifting a vehicle, refer to vehicle manufacturer's recommended lifting points.
•
Inspect the jack prior to each use, remove from service if it is leaking, damaged, excessively worn, or has been
altered in any way.
•
This jack was designed for lifting purposes only. Do not attempt to work on the vehicle until appropriately rated
jacks stands are supporting the load.
•
Do not exceed rated capacity.
•
Do not move or dolly the vehicle while on jack.
•
Chock vehicle to prevent movement.
•
Center load on saddle, off center loads may cause jack failure and / or loss of load.
•
Use jack on a hard level surface.
•
Only attachments and / or adapters supplied by the manufacturer shall be used.
•
No alterations shall be made to this product.
•
Failure to heed these markings may result in severe or fatal personal injury and / or property damage.
OPERATING INSTRUCTIONS - 522SD
OPERATING
PROCEDURES,
INSPECTION
www.affjaxx.com
SAFETY
WARNINGS
WARNING
AND
MAINTENANCE
Need help?
Do you have a question about the 522SD and is the answer not in the manual?
Questions and answers