AFF 5630SD Instructions

INSTRUCTIONS - Model 5630SD - 30 TON AIR/HYDRAULIC BOTTLE JACK
IMPORTANT: READ THESE INSTRUCTIONS AND ALL WARNINGS PRIOR TO USING THIS EQUIPMENT.
UNDERSTAND ALL
REQUIREMENTS. FAILURE TO DO SO COULD CAUSE AN ACCIDENT RESULTING IN SERIOUS OR
FATAL INJURY AND/OR PERSONAL PROPERTY DAMAGE.
The use of shop equipment is subject to certain hazards that cannot be prevented by mechanical means, but only by
exercise of intelligence, care, and common sense.
operation of equipment who are careful, competent, trained, and qualified in the safe operation of this equipment and its
proper use. Examples of hazards are dropping, tipping, or slipping of parts/components caused primarily by improperly
securing loads, overloading, off-centered loads, use on other than hard level surfaces, and using equipment for a purpose for
which it was not designed.
The owner and / or operator shall study and understand the product and safety instructions before operating this equipment.
Safety information shall be emphasized and understood. If the operator is not fluent in English, the product and safety
instructions shall be read to and discussed with the operator in the operator's native language by the purchaser / owner or
his designee, making sure that the operator comprehends their contents. A copy of these instructions / warnings shall
be retained for future reference.
Visual inspection shall be made before each use of this equipment, checking for abnormal conditions, such as cracked
welds, leaks, damaged, loose or missing parts. This equipment shall be removed immediately from service if it is believed to
have been subjected to an abnormal or shock load, the equipment shall be inspected by a qualified repair facility. Owners
and / or operators should be aware that repair of this equipment may require specialized knowledge and facilities. It is
recommended that this equipment be inspected annually by a qualified repair facility. Defective parts, decals, safety labels
or signs should be replaced with AFF specified parts.
Study understand, and follow all instructions before operating this device.
•
When using various shop equipment, basic safety precautions should always be followed.
•
• Keep work area clean and free from debris.
• Keep children away from work area and shop equipment.
• Do not exceed rated capacity.
• Use only on hard, level surfaces.
• Lifting device only. Immediately after lifting, support the vehicle with appropriate means.
• Lift only on areas of the vehicle as specified by the vehicle manufacturer.
• Only attachments and/or adapters supplied by the manufacturer shall be used.
• No alterations shall be made to this product.
Failure to heed these instructions may result in personal injury and/or property damage.
•
OPERATING PROCEDURES,
WARNING
It is therefore essential to have personnel involved in the use and
INSPECTION
WARNING
SAFETY WARNINGS AND MAINTENANCE