ADVANCED SIMRACING ASR4 Assembly And User's Manual page 8

4.
Measure 22" as shown
and tighten fully.
You can cap up the
Corner gussets.
5.
If using adjustable legs, follow the "Adjustable feet Add-on" instruction at the
end of the manual and skip to step 7
Loosely assemble the rubber
feet with the M6 X 20 screw
and M6 T-Nut.
4X
6.
Slide the rubber feet through the bottom slot on the 4.5" X 50" Extrusions.
6