How To Set The Clock; Sound Signals And How To Change Them - Zojirushi NP-NWC10 Operating Instructions Manual

HOW TO SET THE CLOCK

If the clock is inaccurate, set the correct time as shown below.
•T h e clock is displayed in 24-hour (military) time.
e.g. If the current tim e is 15:01 but displays 14:56.
Set the Inner Cooking Pan and insert the Power Plug
1
into an electrical outlet.
2
Press the or
Setting and adjust the clock to the current time while
the time display is blinking.
|[T) : Each press advances the time in 1-minute increments.
: Each press reverses the time in 1 -minute increments.
• Press and hold either button to quickly adjust in 10-minute
increments.
3
The time display will stop blinking after 3 seconds,
indicating the Time Setting is completed.
If the time display still does not show the current time, repeat Step
•Although the clock is set before shipment from the factory, certain conditions such as room temperature may cause it to
display an inaccurate time.
• If the clock is inaccurate, cooking will not be completed at the time you set for the Timer.
•T h e clock cannot be changed during Cooking, Reheating, Regular Keep Warm, Extended Keep Warm or Timer Cooking.
•Although the clock display turns off when the Power Plug is disconnected, the current time will reappear when the Power
Plug is connected again.

SOUND SIGNALS AND HOW TO CHANGE THEM

This product is equipped with a Sound Signal function, which will inform you when the Rice Cooker begins cooking,
when the Timer is set, or when cooking has completed.
Types of Sound Signals
Types of Sound Signals
and their meanings
Indication
Cooking has begun
Timer is set
Cooking/Reheating has completed
The Outer Lid is not closed during Keep
Warm
The rice has not been loosened after cooking
. completion
How to Change the Sound Signal
Set the Inner Cooking Pan and insert the Power
1
Plug into an electrical outlet.
2
Hold the button for more than 3 seconds.
(( timer )
Each time the TIMER button is held for more than 3 seconds,
the Sound Signal will change.
3
The setting is completed when the desired Sound Signal is heard.
•T h e selected Sound Signal is stored even if the Power Plug is disconnected from the electrical outlet.
10
button to initiate the Time
You can choose the Sound Signals from the follow ing
Melody
Default setting at the time
of shipment from the
factory-
'Twinkle, Twinkle, Little Star"
'Twinkle, Twinkle, Little Star"
"Amaryllis"
four short beeps
four short beeps
Time correction is completed
I Stops ■
1 blinking J
t J - U
2
to readjust the time.
Beep
Choose this setting to
change from a Melody.
a beep
a beep
beeps 5 times
• You cannot change the Melody Signal for the
initiation of Reheating.
• You cannot change the Sound Signal during
Cooking, Reheating, Regular Keep Warm,
Extended Keep Warm or Timer Cooking.
• If you find it difficult to change/select the
Sound Signal, please start over from Step
Press while the time
display is blinking.
t
1
Silent
Choose this setting to
disable the Sound Signal.
no sound
no sound
no sound
1.
]