Related Manuals for MP Filtri FZH040
Summary of Contents for MP Filtri FZH040
- Page 1 STAINLESS STEEL HI PRESSURE FILTERS INSTALLATION, SERVICE AND MAINTENANCE MANUAL AND SAFETY INSTRUCTIONS INSTRUCTIONS FZH040 FZH040 PASSION PERFORM...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Page Description General warnings Tools Handling Dimensional drawings Installation Commissioning Standard maintenance Filter element replacement Special maintenance Clogging indicator (or plug) replacement Seals replacement Instructions for use in explosive atmospheres Regulations Spare parts list Ordering code 13.1 Filter / Housing / Bowl 13.2 Filter element... -
Page 4: Description
- Connect the filter with an anti-loosening system and regularly check the condition of the connection - The declared performances and the safety of the product are only guaranteed when MP Filtri original spare parts are used - Warranty is only effective if MP Filtri original spare parts are used. -
Page 5: Dimensional Drawings
FZH040 Please refer to the following Weight table: WEIGHTS [kg] SERIES AND SIZE Length FZH040 Dimensional drawings FZH040 Filter length [mm] Connection for differential indicator X3 plug not included Connections 3/8” UNC 3/8” UNC Recommended clearance space for maintenance R - depth 12 mm Nr. -
Page 6: Installation
Parts identification Parts identification FZH039 Installation Item Description Clogging indicator connection Clogging indicator connection - Check that the system working pressure does not exceed the maximum working pressure of the filter. The maximum working pressure of the filter is shown on the laser marking on the head - Check that the filter is compatible with the fluid used in the system - Remove the plastic plugs from the inlet, the outlet and the indicator connection - Check that the correct filter elements are fitted into the filter... -
Page 7: Standard Maintenance
FZH040 Standard maintenance FILTER ELEMENT REPLACEMENT The clogging indicator monitors the conditions of the filter element in the working section of the filter. The alarm signal shown by the differential indicator during the normal working conditions (pressure, temperatures …) means that the filter element needs to be replaced. -
Page 8: Special Maintenance
Special maintenance CLOGGING INDICATOR (OR PLUG) REPLACEMENT - Check the availability of the right spare parts by comparing the part numbers shown on them with that shown on the filter name plate or spare parts list - For the disassembly and the assembly of the parts, please refer to the tools table in paragraph 3 - Switch off the system - (Fig. - Page 9 FZH040 Smontaggio Montaggio ntaggio Svuotamento Smontaggio Montaggio Montaggio Smontaggio enitore contenitore elemento elemento contenitore connettore corpo indicatore corpo indicatore Smontaggio Svuotamento Smontaggio Montaggio Montaggio Smontaggio Smontaggio Montaggio Smontaggio Montaggio ntaggio Montaggio Sost. guarnizioni Sost. guarnizioni corpo indicatore corpo indicatore contenitore...
-
Page 10: Instructions For Use In Explosive Atmospheres
MP FILTRI has carried out a voluntary certification of a part of the product range in compliance with directive 2014/34/EU, in order to guarantee an appropriate degree of safety in these particular conditions. -
Page 11: Spare Parts List
Spare parts list FZH040 FZH040 12. Spare parts list Item Quantity Description Designation / Ordering code Complete filter Item Q.ty Description Designation / ordering code Housing Complete filter See ordering table See “Ordering Code” table Bowl assembly Housing See ordering table... -
Page 12: Ordering Code
16 µm Inorganic microfiber 25 µm Valves Element ∆p 20 bar • • • 210 bar • • • Execution MP Filtri standard 210 bar, stainless steel filter element • • • • • • Customized Stainless steel high pressure filters... -
Page 13: Filter Element
16 µm Inorganic microfiber Inorganic microfiber 25 µm Seals EPDM Element ∆p 20 bar 210 bar Execution 210 bar, stainless steel filter element MP Filtri standard Customized CLOGGING INDICATORS Electrical differential indicator Visual differential indicator Plug Stainless steel high pressure filters... -
Page 14: Troubleshooting
14. Troubleshooting 14.1 MISUSE OF THE PRODUCT This product should be connected to a hydraulic line; this must not exceed upper pressure limit of the product. his product should follow all standard operating procedures previously set at the operating location as well as the procedures required by the manufacturer. - Page 15 All data, details and words contained in this publication are provided for use by technically qualifi ed personnel at their discretion, without warranty of any kind. MP Filtri reserves the right to make modifi cations to the models and versions of the described products at any time for both technical and/or commercial reasons.
- Page 16 WORLDWIDE NETWORK CANADA CHINA FRANCE GERMANY INDIA SINGAPORE UNITED ARAB EMIRATES UNITED KINGDOM ITALY PASSION PERFORM mp ltri.com...
Need help?
Do you have a question about the FZH040 and is the answer not in the manual?
Questions and answers