Related Manuals for MP Filtri FZP136
Summary of Contents for MP Filtri FZP136
- Page 1 STAINLESS STEEL HI PRESSURE FILTERS INSTALLATION, SERVICE AND MAINTENANCE MANUAL AND SAFETY INSTRUCTIONS INSTRUCTIONS FZP136 FZP136 PASSION PERFORM...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Page Description General warnings Tools Handling Dimensional drawings Installation Commissioning Standard maintenance Filter element replacement Special maintenance Clogging indicator (or plug) replacement Seals replacement Instructions for use in explosive atmospheres Regulations Spare parts list Ordering code 13.1 Filter / Housing / Bowl 13.2 Filter element... -
Page 4: Description
- Connect the filter with an anti-loosening system and regularly check the condition of the connection - The declared performances and the safety of the product are only guaranteed when MP Filtri original spare parts are used - Warranty is only effective if MP Filtri original spare parts are used. -
Page 5: Handling
FZP136 Handling - The unit is shipped in a cardboard box with dimensions depending on the order - The handling must be carried out in accordance with the laws in force in the country of use of the product - Handle the product with care, avoid impacts - Store in a dry and frost-free room - The unit should be stored in a suitable location away from the production area when not in use. -
Page 6: Installation
Parts identification Parts identification FZP136 Item Description Clogging indicator connection Installation Clogging indicator connection - Check that the system working pressure does not exceed the maximum working pressure of the filter. The maximum working pressure of the filter is shown on the laser marking on the head... -
Page 7: Standard Maintenance
FZP136 Standard maintenance FILTER ELEMENT REPLACEMENT The clogging indicator monitors the conditions of the filter element in the working section of the filter. The alarm signal shown by the differential indicator during the normal working conditions (pressure, temperatures …) means that the filter element needs to be replaced. -
Page 8: Special Maintenance
Special maintenance CLOGGING INDICATOR (OR PLUG) REPLACEMENT - Check the availability of the right spare parts by comparing the part numbers shown on them with that shown on the filter name plate or spare parts list - For the disassembly and the assembly of the parts, please refer to the tools table in paragraph 3 - Switch off the system - (Fig. - Page 9 FZP136 Montaggio Montaggio Smontaggio Montaggio montaggio Svuotamento Smontaggio Smontaggio ontenitore contenitore elemento elemento contenitore connettore corpo indicatore corpo indicatore Filtro Filtro Smontaggio Smontaggio Svuotamento Svuotamento Smontaggio Smontaggio Montaggio Montaggio Montaggio Montaggio Smontaggio Smontaggio Smontaggio Montaggio Smontaggio Svuotamento Smontaggio Montaggio Montaggio...
-
Page 10: Instructions For Use In Explosive Atmospheres
MP FILTRI has carried out a voluntary certification of a part of the product range in compliance with directive 2014/34/EU, in order to guarantee an appropriate degree of safety in these particular conditions. -
Page 11: Spare Parts List
Clogging indicator See ordering table Indicator seal O-Ring 2050 - di = 12.42 - d = 1.78 Head seal Private dimensions MP Filtri Seals kit 02050636 02050637 02050639 Filter element seal O-Ring 3106 - di = 26,65 - d = 2,62... -
Page 12: Ordering Code
6 µm Inorganic microfiber 10 µm Inorganic microfiber 16 µm Inorganic microfiber 25 µm Valves Element ∆p 20 bar • 210 bar • Execution MP Filtri standard 210 bar, stainless steel filter element • • Customized Stainless steel high pressure filters... -
Page 13: Filter Element
Inorganic microfiber 25 µm Seals Element ∆p 20 bar 210 bar 210 bar, stainless steel filter element Execution MP Filtri standard Customized CLOGGING INDICATORS Electrical differential indicator Electrical / visual differential indicator Visual differential indicator Visual differential indicator Plug Stainless steel high pressure filters... -
Page 14: Troubleshooting
14. Troubleshooting 14.1 MISUSE OF THE PRODUCT This product should be connected to a hydraulic line; this must not exceed upper pressure limit of the product. his product should follow all standard operating procedures previously set at the operating location as well as the procedures required by the manufacturer. - Page 15 All data, details and words contained in this publication are provided for use by technically qualifi ed personnel at their discretion, without warranty of any kind. MP Filtri reserves the right to make modifi cations to the models and versions of the described products at any time for both technical and/or commercial reasons.
- Page 16 WORLDWIDE NETWORK CANADA CHINA FRANCE GERMANY INDIA SINGAPORE UNITED ARAB EMIRATES UNITED KINGDOM ITALY PASSION PERFORM mp ltri.com...
Need help?
Do you have a question about the FZP136 and is the answer not in the manual?
Questions and answers