Related Manuals for MP Filtri FZB039
Summary of Contents for MP Filtri FZB039
- Page 1 STAINLESS STEEL HI PRESSURE FILTERS INSTALLATION, SERVICE AND MAINTENANCE MANUAL AND SAFETY INSTRUCTIONS FZB039 PASSION PERFORM...
- Page 2 Stainless steel high pressure filters...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Page Description General warnings Tools Handling Dimensional drawings Installation Commissioning Standard maintenance Filter element replacement Special maintenance Clogging indicator (or plug) replacement Seals replacement Instructions for use in explosive atmospheres Regulations Spare parts list Ordering code 13.1 Filter / Housing / Bowl 13.2 Filter element... -
Page 4: Description
- Connect the filter with an anti-loosening system and regularly check the condition of the connection - The declared performances and the safety of the product are only guaranteed when MP Filtri original spare parts are used - Warranty is only effective if MP Filtri original spare parts are used. -
Page 5: Dimensional Drawings
FZB039 Please refer to the following Weight table: WEIGHTS [kg] SERIES AND SIZE Length FZB039 Dimensional drawings FZB039 Connection for differential indicator Filter X2 plug not included length [mm] Ø10.5 Nr. 2 holes A/F 22 Ø64 Recommended clearance space for maintenance... -
Page 6: Installation
Parts identification FZB039 Item Description Clogging indicator connection Installation Clogging indicator connection - Check that the system working pressure does not exceed the maximum working pressure of the filter. The maximum working pressure of the filter is shown on the laser marking on the head... -
Page 7: Standard Maintenance
FZB039 Standard maintenance FILTER ELEMENT REPLACEMENT The clogging indicator monitors the conditions of the filter element in the working section of the filter. The alarm signal shown by the differential indicator during the normal working conditions (pressure, temperatures …) means that the filter element needs to be replaced. -
Page 8: Special Maintenance
Special maintenance CLOGGING INDICATOR (OR PLUG) REPLACEMENT - Check the availability of the right spare parts by comparing the part numbers shown on them with that shown on the filter name plate or spare parts list - For the disassembly and the assembly of the parts, please refer to the tools table in paragraph 3 - Switch off the system - (Fig. - Page 9 FZB039 Smontaggio Montaggio Smontaggio Svuotamento Smontaggio Montaggio Montaggio Smontaggio Montaggio corpo indicatore corpo indicatore contenitore contenitore elemento elemento contenitore connettore connettore ntaggio Montaggio Filtro Filtro Smontaggio Svuotamento Smontaggio Montaggio Smontaggio Montaggio Montaggio Smontaggio Smontaggio Svuotamento Montaggio Smontaggio Smontaggio Sost. guarnizioni...
-
Page 10: Instructions For Use In Explosive Atmospheres
MP FILTRI has carried out a voluntary certification of a part of the product range in compliance with directive 2014/34/EU, in order to guarantee an appropriate degree of safety in these particular conditions. -
Page 11: Spare Parts List
Spare parts list FZB039 FZB039 12. Spare parts list Item Quantity Description Designation / Ordering code Complete filter Housing See “Ordering Code” table Bowl assembly Filter element Item Q.ty Description Designation / ordering code Clogging indicator Complete filter See ordering table... -
Page 12: Ordering Code
10 µm Inorganic microfiber 16 µm Inorganic microfiber 25 µm Valves Element ∆p 20 bar • • 210 bar • • Execution MP Filtri standard 210 bar, stainless steel filter element • • • • Customized Stainless steel high pressure filters... -
Page 13: Filter Element
Inorganic microfiber 25 µm Seals Element ∆p 20 bar 210 bar 210 bar, stainless steel filter element Execution MP Filtri standard Customized CLOGGING INDICATORS Electrical differential indicator Electrical / visual differential indicator Visual differential indicator Visual differential indicator Plug Stainless steel high pressure filters... -
Page 14: Troubleshooting
14. Troubleshooting 14.1 MISUSE OF THE PRODUCT This product should be connected to a hydraulic line; this must not exceed upper pressure limit of the product. his product should follow all standard operating procedures previously set at the operating location as well as the procedures required by the manufacturer. - Page 15 All data, details and words contained in this publication are provided for use by technically qualifi ed personnel at their discretion, without warranty of any kind. MP Filtri reserves the right to make modifi cations to the models and versions of the described products at any time for both technical and/or commercial reasons.
- Page 16 WORLDWIDE NETWORK CANADA CHINA FRANCE GERMANY INDIA SINGAPORE UNITED ARAB EMIRATES UNITED KINGDOM ITALY PASSION PERFORM mp ltri.com...
Need help?
Do you have a question about the FZB039 and is the answer not in the manual?
Questions and answers