ASROCK N7AD-SLI - V1.0 User Manual page 8

- Microsoft
OS
compliant
- FCC, CE, WHQL
Certifications
* For detailed product information, please visit our website: http://www.asrock.com
WARNING
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using the third-
party overclocking tools. Overclocking may affect your system stability, or even
cause damage to the components and devices of your system. It should be done at
your own risk and expense. We are not responsible for possible damage caused by
overclocking.
CAUTION!
1. About the setting of "Hyper Threading Technology", please check page
51.
2. This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 46 for details.
3. This motherboard supports Dual Channel Memory Technology. Before
you implement Dual Channel Memory Technology, make sure to read
the installation guide of memory modules on page 17 for proper
installation.
4. Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
and Windows Vista
®
64-bit with 64-bit CPU, there is no such limitation.
5. This motherboard supports NVIDIA
SLI function, please follow the instructions on page 21 and 22 to reverse
TM
the direction of ASRock SLI/XFire Switch Card. For the information of the
compatible SLI
TM
ported PCI Express VGA Card List for SLI
proper installation of PCI Express VGA card, please refer to the installation
guide on page 19.
6. For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-
channel, 6-channel, and 8-channel modes. Please check the table on
page 12 for proper connection.
7. Before installing SATAII hard disk to SATAII connector, please read the
"SATAII Hard Disk Setup Guide" on page 37 to adjust your SATAII hard
disk drive to SATAII mode. You can also connect SATA hard disk to SATAII
connector directly.
8. This motherboard supports eSATAII interface, the external SATAII
specification. Please read "eSATAII Interface Introduction" on page 34
for details about eSATAII and eSATAII installation procedures.
9. Power Management for USB 2.0 works fine under Microsoft
Vista 64-bit / Vista
TM
Windows XP / XP 64-bit / Vista
® ®
. For Windows XP 64-bit and Windows
TM ®
SLI technology. If you want to use
® TM
Mode PCI Express VGA cards, please refer to the "Sup-
Mode" on page 10. For the
TM
/ XP 64-bit / XP SP1 or SP2.
TM
8 8 8 8 8
/ Vista 64-bit
TM TM
XP
®
Vista
® TM
Windows
® ®