Hardware Health Event Monitoring Screen - ASROCK N7AD-SLI - V1.0 User Manual

USB Controller
Use this item to enable or disable the use of USB controller.
USB 2.0 Support
Use this item to enable or disable the USB 2.0 support.
Legacy USB Support
Use this option to select legacy support for USB devices. There are four
configuration options: [Enabled], [Auto], [Disabled] and [BIOS Setup Only].
The default value is [BIOS Setup Only]. Please refer to below descriptions
for the details of these four options:
[Enabled] - Enables support for legacy USB.
[Auto] - Enables legacy support if USB devices are connected.
[Disabled] - USB devices are not allowed to use under legacy OS and BIOS
setup when [Disabled] is selected. If you have USB compatibility issue, it is
recommended to select [Disabled] to enter OS.
[BIOS Setup Only] - USB devices are allowed to use only under BIOS setup
and Windows / Linux OS.
3 . 5 3 . 5 3 . 5 3 . 5

3 . 5 Hardware Health Event Monitoring Screen

Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU fan
speed, chassis fan speed, and the critical voltage.
Main Smart Advanced
Hardware Health Event Monitoring
CPU Temperature
M / B Temperature
CPU Fan Speed
Chassis Fan Speed
Vcore
+ 3.30V
+ 5.00V
+ 12.00V
CPU Quiet Fan
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
BIOS SETUP UTILITY
H/W Monitor Boot Security
Enable/Disable
CPU Quiet Fan
Function.
: 37 C / 98 F
: 31 C / 87 F
: 3400 RPM
: N / A
: 1.629V
: 3.306V
: 5.067V
Select Screen
: 11.890V
Select Item
F1 General Help
[Disabled] F9 Load Defaults
F10 Save and Exit
ESC Exit
5 9 5 9 5 9
5 9 5 9
Exit