Download
Share
Print this page
ASROCK N68-GS3 Installation Manual
  1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. N68-GS3 -
  6. Installation manual
ASROCK N68-GS3 Installation Manual

ASROCK N68-GS3 Installation Manual

Hide thumbs Also See for N68-GS3:

Advertisement

Quick Links

See also: User Manual
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2009 ASRock INC. All rights reserved.
ASRock
Published November 2009
N68-GS3 / N68-S3
Motherboard
1 1 1 1 1

Advertisement

loading

Related Manuals for ASROCK N68-GS3

Summary of Contents for ASROCK N68-GS3

  • Page 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.

  • Page 2: Motherboard Layout

    GS3 / N68-S3) PS2_USB_PW1 Jumper Chassis Speaker Header CPU Fan Connector (CPU_FAN1) (SPEAKER 1, Purple) 2 x 240-pin DDR3 DIMM Slots USB 2.0 Header (USB6_7, Blue) (Dual Channel: DDR3_A1, DDR3_B1; Blue) System Panel Header (PANEL1, Orange) ATX Power Connector (ATXPWR1) Print Port Header (LPT1, Purple) SATAII Connector (SATAII_2 (PORT 1.1))
  • Page 3 Line In (Light Blue) VGA Port Front Speaker (Lime) COM Port Microphone (Pink) PS/2 Keyboard Port (Purple) * For N68-GS3 motherboard, please refer to the table below for the LAN port LED indications. LAN Port LED Indications ACT/LINK SPEED Activity/Link LED SPEED LED...
  • Page 4 ASRock’s commit- ment to quality and endurance. In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD.

  • Page 5: Specifications

    - Micro ATX Form Factor: 9.6-in x 7.0-in, 24.4 cm x 17.8 cm - Support for AM3 processors: AMD Phenom II X4 / X3 / X2 (except 920 / 940) / Athlon II X4 / X3 / X2 / Sempron processors (see CAUTION 1) - Supports AMD’s Cool ‘n’ Quiet Technology - FSB 1000 MHz (2.0 GT/s)
  • Page 6 Connector - 4 x Serial ATAII 3.0Gb/s connectors, support RAID (RAID 0, RAID 1, RAID 0+1, RAID 5, JBOD), NCQ and “Hot Plug” functions (see CAUTION 7) - 1 x ATA133 IDE connector (supports 2 x IDE devices) - 1 x Floppy connector...
  • Page 7 Before installing SATAII hard disk to SATAII connector, please read the “SATAII Hard Disk Setup Guide” on page 22 of “User Manual” in the support CD to adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA hard disk to SATAII connector directly.
  • Page 8 USB flash drive or hard drive must use FAT32/16/12 file system. 12. The software name itself – OC DNA literally tells you what it is capable of. OC DNA, an exclusive utility developed by ASRock, provides a conve- nient way for the user to record the OC settings and share with others.
  • Page 9 Installation Installation Installation This is a Micro ATX form factor (9.6-in x 7.0-in, 24.4 cm x 17.8 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to en- sure that the motherboard fits into it. Pre-installation Precautions...

  • Page 10: Installation Of Cpu Fan And Heatsink

    Step 4. When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.
  • Page 11 Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
  • Page 12 PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 (PCIE x1 slot) is used for PCI Express cards with x1 lane width cards, such as Gigabit LAN card, SATA2 card, etc.
  • Page 13 PCI Express VGA card to PCIE2 (PCIE x16 slot). Please refer to page 12 for proper expansion card installation procedures for details. 2. Connect the D-Sub monitor cable to the VGA/D-Sub port on the I/O panel of this motherboard. Connect another D-Sub monitor cable to the VGA/D-Sub connector of the add-on PCI Express VGA card.
  • Page 14 CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clear-CMOS action.
  • Page 15 Floppy Connector (33-pin FLOPPY1) (see p.2 No. 19) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) (39-pin IDE1, see p.2 No. 6)
  • Page 16 HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC’97 audio panel, please install it to the front panel audio header as below: A.
  • Page 17 Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.

  • Page 18: Untied Overclocking Technology

    Untied Overclocking function, please enter “Overclock Mode” option of BIOS setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate under a more stable overclocking environment.
  • Page 19 ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double- click on the file “ASSETUP.EXE” from the “BIN” folder in the Support CD to display the menus.
  • Page 20 1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock N68-GS3 / N68-S3 Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Page 21 - Micro ATX-Formfaktor: 24.4 cm x 17.8 cm; 9.6 Zoll x 7.0 Zoll - Unterstützung von Socket AM3-Prozessoren: AMD Phenom II X4 / X3 / X2 (außer 920 / 940) / Athlon X4 / X3 / X2 / Sempron-Prozessor (siehe VORSICHT 1) - Unterstützt Cool ‘n’...
  • Page 22 Anschlüsse - 4 x SATAII-Anschlüsse, unterstützt bis 3.0 Gb/s Datenübertragungsrate, unterstützt RAID (RAID 0, RAID 1, RAID 0+1, RAID 5, JBOD), NCQ und “Hot Plug” Funktionen (siehe VORSICHT 7) - 1 x ATA133 IDE-Anschlüsse (Unterstützt bis 2 IDE-Geräte) - 1 x FDD-Anschlüsse - 1 x Druckerport-Anschlussleiste - CPU/Gehäuse-Lüfteranschluss...
  • Page 23 Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Page 24 USB-Flash-Laufwerk oder die Festplatte das Dateisystem FAT32/16/12 benutzen muss. 12. Allein der Name – OC DNA* – beschreibt es wörtlich, was die Software zu leisten vermag. OC DNA ist ein von ASRock exklusiv entwickeltes Dienstprogramm, das Nutzern eine bequeme Möglichkeit bietet, Übertaktungseinstellungen aufzuzeichnen und sie Anderen mitzuteilen.
  • Page 25 Shutdown durch. Bevor Sie das System neu starten, prüfen Sie bitte, ob der CPU-Lüfter am Motherboard richtig funktioniert, und stecken Sie bitte den Stromkabelstecker aus und dann wieder ein. Um die Wärmeableitung zu verbessern, bitte nicht vergessen, etwas Wärmeleitpaste zwischen CPU und Kühlkörper zu sprühen.
  • Page 26 +5VSB (Standby) zu setzen (siehe S.2, No. 1) und die PS/2 oder USB- Weckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. CMOS löschen (CLRCMOS1, 3-Pin jumper) (siehe S.2, No. 13)
  • Page 27 (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2, No. 19) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (blau) (39-pin IDE1, siehe S.2, No. 6)
  • Page 28 Geräte), wobei jedoch die Bildschirmverdrahtung am Gehäuse HDA unterstützen muss, um richtig zu funktionieren. Beachten Sie bei der Installation im System die Anweisungen in unserem Handbuch und im Gehäusehandbuch. 2. Wenn Sie die AC’97-Audioleiste verwenden, installieren Sie diese wie nachstehend beschrieben an der Front-Audioanschlussleiste: A.
  • Page 29 20-pol. hluss gedacht. ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu verwenden, stecken Sie den Stecker mit Pin 1 und Pin 13 ein. n Sie zu ation. Setzen Installation eines 20-pol. ATX-Netzteils uf [Aktiviert].
  • Page 30 Anschluss für Beachten Sie bitte, dass Sie eine 12V-ATX-Netzteil Stromversorgung mit ATX 12- Volt-Stecker mit diesem (4-pin ATX12V1) Anschluss verbinden müssen, (siehe S.2, No. 24) damit ausreichend Strom geliefert werden kann. Andernfalls reicht der Strom nicht aus, das System zu starten.
  • Page 31 Erscheint der Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf das File ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert.
  • Page 32 Contenu du paquet Contenu du paquet Carte mère ASRock N68-GS3 / N68-S3 (Facteur de forme Micro ATX: 9.6 pouces x 7.0 pouces, 24.4 cm x 17.8 cm) Guide d’installation rapide ASRock N68-GS3 / N68-S3 CD de soutien ASRock N68-GS3 / N68-S3 Deux câble de données Serial ATA (SATA) (Optionnelle)
  • Page 33 - Prise en charge des processeurs sur socket AM3: Processeur Phenom II X4 / X3 / X2 (sauf 920 / 940) / Athlon II X4 / X3 / X2 / Sempron d’AMD (voir ATTENTION 1) - Supporte la technologie Cool ‘n’ Quiet d’AMD...
  • Page 34 - br. 24 connecteur d’alimentation ATX - br. 4 connecteur d’alimentation 12V ATX - Connecteur audio panneau avant - 2 x En-tête USB 2.0 (prendre en charge 4 ports USB 2.0 supplémentaires) (voir ATTENTION 8) BIOS - 4Mb BIOS AMI - BIOS AMI - Support du “Plug and Play”...
  • Page 35 XP / XP 64-bit Certifications - FCC, CE, WHQL * Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web: http://www.asrock.com ATTENTION Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking, y compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking, ou...
  • Page 36 USB ou a unidade de disco rígido devem utilizar o sistema de ficheiros FAT32/16/12. 12. Le nom même du logiciel – OC DNA vous indique littéralement ce dont il est capable. OC DNA, utilitaire exclusif développé par ASRock, offre une façon pratique pour l’utilisateur d’enregistrer les paramètres...
  • Page 37 13. Même si cette carte mère offre un contrôle sans souci, il n’est pas recommandé d’y appliquer un over clocking. Les fréquences autres que les fréquences de bus d’UC recommandées risquent de déstabiliser le système ou d’endommager l’UC. 14. Lorsqu’une surchauffe du CPU est détectée, le système s’arrête automatiquement.
  • Page 38 Broche1 (voir p.2 fig. 19) Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. Connecteur IDE primaire (bleu) (IDE1 br. 39, voir p.2 No. 6)
  • Page 39 MPEG. 1. L’audio à haute définition (HDA) prend en charge la détection de fiche, mais le fil de panneau sur le châssis doit prendre en charge le HDA pour fonctionner correctement. Veuillez suivre les instructions dans notre manuel et le manuel de châssis afin installer votre système.
  • Page 40 (voir p.2 fig. 2) ien que cette carte mère offre un support de (Ventilateur silencieux) ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur.
  • Page 41 Bien que cette carte mère fournisse un connecteur de courant ATX 24 broches, elle peut encore fonctionner si vous adopter une alimentation traditionnelle ATX 20 broches. Pour utiliser une alimentation ATX 20 broches, branchez à l’alimentation électrique ainsi qu’aux broches 1 et 13.
  • Page 42 BIOS après le POST, veuillez redémarrer le système en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant.
  • Page 43 1. Introduzione Grazie per aver scelto una scheda madre ASRock N68-GS3 / N68-S3, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità...
  • Page 44 - Supporto di processori Socket AM3: AMD Phenom II X4 / X3 / X2 (fatta eccezione per 920 / 940) / Athlon II X4 / X3 / X2 / Sempron (vedi ATTENZIONE 1) - Supporto tecnologia AMD Cool ‘n’ Quiet - FSB 1000 MHz (2.0 GT/s)
  • Page 45 Connettori - 4 x connettori SATAII 3.0Go/s, sopporta RAID (RAID 0, RAID 1, RAID 0+1, RAID 5, JBOD), NCQ e “Collegamento a caldo” (vedi ATTENZIONE 7) - 1 x connettori ATA133 IDE (supporta fino a 2 dispositivi IDE) - 1 x porta Floppy...
  • Page 46 * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può...
  • Page 47 Flash USB o il disco rigido devono usare il File System FAT32/ 16/12. 12. Il nome stesso del software – OC DNA – dice di cosa è capace. OC DNA, una utilità esclusiva sviluppata da ASRock, fornisce un modo comodo per registrare le impostazioni OC e condividerle con gli altri.
  • Page 48 Quando il ponticello è posizionato sui pin, il jumper è “CORTOCIRCUITATO”. Se sui pin non ci sono ponticelli, il jumper è “APERTO”. L’illustrazione mostra un jumper a 3 pin in cui il pin1 e il pin2 sono “CORTOCIRCUITATI” quando il ponticello è CORTOCIRCUITATO APERTO posizionato su questi pin.
  • Page 49 (33-pin FLOPPY1) (vedi p.2 item 19) Lato del Pin1 con la striscia rossa Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (blu) (39-pin IDE1, vedi p.2 Nr. 6)
  • Page 50 1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei connettori, però il pannello dei cavi sul telaio deve supportare la funzione HDA (High Definition Audio) per far sì che questa operi in modo corretto. Attenersi alle istruzioni del nostro manuale e del manuale del telaio per installare il sistema.
  • Page 51 Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare anche senza la funzione di controllo della velocità della ventola. Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3.
  • Page 52 Connettore ATX 12V È necessario collegare una alimentazione con spinotto da (4-pin ATX12V1) 12V ATX a questo connettore (vedi p.2 item 24) in modo che possa fornire energia sufficiente. In caso contrario l’unità non si avvia. ASRock N68-GS3 / N68-S3...
  • Page 53 BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema. El BIOS Setup Utility es diseñádo “user-friendly”.
  • Page 54 ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 55 Especificación Especificación Especificación Especificación Plataforma - Factor forma Micro ATX: 24,4 cm x 17,8 cm, 9,6” x 7,0” Procesador - Compatibilidad con procesadores con conector AM3: procesador AMD Phenom II X4 / X3 / X2 (excepto 920 / 940) / Athlon II X4 / X3 / X2 / Sempron (vea ATENCIÓN 1) - Con soporte para tecnología Cool ‘n’...
  • Page 56 - Conexión de HD audio: Entrada de línea / Altavoz frontal / Micrófono Conectores - 4 x conexiones SATAII, admiten una velocidad de transferencia de datos de hasta 3,0Gb/s, soporta RAID (RAID 0, RAID 1, RAID 0+1, RAID 5, JBOD), NCQ y “Conexión en caliente”...
  • Page 57 ADVERTENCIA Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad liberada o utilizando las herramientas de aumento de velocidad de otros fabricantes.
  • Page 58 Recuerde que la unidad flash USB o disco duro utilizado debe disponer del sistema de archivos FAT32/16/12. 12. El nombre del propio software, OC DNA, indica con claridad aquello de lo que es capaz. OC DNA, una exclusiva utilidad desarrollada por ASRock, representa para el usuario una forma cómoda de grabar su configuración...
  • Page 59 3 para habilitar +5VSB (vea p.2, No. 1) (standby) para PS/2 o USB wake up events. Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la fuente de electricidad. Limpiar CMOS (CLRCMOS1, jumper de 3 pins)
  • Page 60 (vea p.2, No. 19) la banda roja debe quedar en el mismo lado que el contacto 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (azul) (39-pin IDE1, vea p.2, No.
  • Page 61 2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del 3.0 Gb/s. panel frontal de la siguiente manera: A.
  • Page 62 Si pretende enchufar el ventilador de procesador de 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos...
  • Page 63 Conector de ATX 12V power Tenga en cuenta que es necesario conectar este (4-pin ATX12V1) conector a una toma de corriente (vea p.2, No. 24) con el enchufe ATX 12V, de modo que proporcione suficiente electricidad. De lo contrario no se podrá...
  • Page 64 Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora.
  • Page 65 VGA e das CPUs suportadas no site da web da ASRock. Website de ASRock http://www.asrock.com Se precisar de apoio técnico em relação a este placa-mãe, por favor visite o nosso sítio da internet para informação específica acerca do modelo que está a utilizar. www.asrock.com/support/index.asp 1.1 Este pacote contém...
  • Page 66 - Suporte para processadores AM3: Processador AMD Phenom II X4 / X3 / X2 (exceto 920 / 940) / Athlon II X4 / X3 / X2 / Sempron (veja o AVISO 1) - Suporta a tecnologia AMD Cool ‘n’ Quiet...
  • Page 67 Microfone Conectores - 4 x conectores SATAII, suporte a taxa de transferência de dados de até 3,0 Gb/s, suporte RAID (RAID 0, RAID 1, RAID 0+1, RAID 5, JBOD), NCQ e “conexão a quente” (veja o AVISO 7) - 1 x conectores ATA133 IDE (suporta até...
  • Page 68 AVISO Tenha em atenção que a operação de overclocking envolve alguns riscos, nomeadamente no que diz respeito ao ajuste das definições do BIOS, à aplicação da tecnologia Untied Overclocking ou à utilização de ferramentas de overclocking de terceiros. O overclocking pode afectar a estabilidade do seu sistema ou até...
  • Page 69 Inteligente. Sítio Web da ASRock: http://www.asrock.com 11. ASRock Instant Flash est un utilitaire de flash du BIOS flash intégré dans la ROM Flash. Cet outil pratique de mise à jour du BIOS vous permet de mettre à jour le BIOS du système sans entrer d’abord dans un système d’exploitation tel que MS-DOS ou Windows...
  • Page 70 (veja a folha 2, No. 1) para PS/2 ou eventos de wake up na USB. Nota: Para escolher +5VSB, é preciso uma corrente de stand by de 2 A ou mais. Restaurar CMOS (CLRCMOS1, jumper de 2 pinos) (veja a folha 2, No. 13) Configuração-...
  • Page 71 (FLOPPY 1, 33 pinos) (veja a folha 2, No. 19) o lado com listras vermelhas para o Pino 1 Nota: Certifique-se de que o lado com listras vermelhas no cabo seja conectado ao lado Pino 1 do conector. Conector primário (Azul) (IDE1 de 39 pinos, veja a folha 2, No.
  • Page 72 Siga s instruções que aparecem no manual e no manual do chassis para instalar o sistema. 2. Se utilizar o painel de áudio AC’97, instale-o no cabeçalho de áudio do painel frontal, como a figura abaixo mostra: A. Ligue o Mic_IN (MIC) ao MIC2_L.
  • Page 73 (Ventoinha silenciosa), uma ventoinha de 3 pinos para CPU poderá funcionar mesmo sem a função de controlo de velocidade da ventoinha. Se pretender ligar uma ventoinha de 3 pinos para CPU ao conector de ventoinha do CPU nesta placa-mãe, por favor, ligue-a aos pinos 1-3.
  • Page 74 Conector ATX 12 V Note que é necessário ligar uma fonte de alimentação com (ATX12V1 de 4 pinos ) conector ATX 12V neste (veja a folha 2, No. 24) conector para fornecer alimentação suficiente. Do contrário, haverá falhas de funcionamento.
  • Page 75 64 bits / Vista / Vista de 64 bits / XP / XP de 64 bits. O CD de instalação que acompanha a placa Mãe contem: drivers e utilitários necessários para um melhor desempenho da placa Mãe. Para começar a usar o CD de instalação, introduza o CD na leitora de CD-ROM do computador.
  • Page 76 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 77 ‘ ’ ® ® ® ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 78 ® ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 79 “ ” ® ® ® “ ” “ ” ® ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 80 ® ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 81 “ ” “ ” “ ” “ ” ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 82 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 83 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 84 4 3 2 1 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 85 “ ” “ ” ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 86 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 87 ‘ ’ ® ® ® ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 88 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 89 ® ® ® “ ” ® ® ® ® ® ® ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 90 ® – 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 91 1 0 1 1 0 1 1 0 1 1 0 1 1 0 1 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 92 1 0 2 1 0 2 1 0 2 1 0 2 1 0 2 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 93 1 0 3 1 0 3 1 0 3 1 0 3 1 0 3 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 94 4 3 2 1 1 0 4 1 0 4 1 0 4 1 0 4 1 0 4 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 95 ® ® 1 0 5 1 0 5 1 0 5 1 0 5 1 0 5 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 96 1 0 6 1 0 6 1 0 6 1 0 6 1 0 6 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 97 ‘ ’ ™ ® ® ® 1 0 7 1 0 7 1 0 7 1 0 7 1 0 7 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 98 ® ® 1 0 8 1 0 8 1 0 8 1 0 8 1 0 8 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 99 ® ® ® ® ® ® 1 0 9 1 0 9 1 0 9 1 0 9 1 0 9 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 100 1 1 0 1 1 0 1 1 0 1 1 0 1 1 0 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 101 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 102 1 1 2 1 1 2 1 1 2 1 1 2 1 1 2 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 103 4 3 2 1 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 104 ® ® 1 1 4 1 1 4 1 1 4 1 1 4 1 1 4 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 105 1 1 5 1 1 5 1 1 5 1 1 5 1 1 5 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 106 1 1 6 1 1 6 1 1 6 1 1 6 1 1 6 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 107 ® ® ® 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 108 ® ® 1 1 8 1 1 8 1 1 8 1 1 8 1 1 8 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 109 ® ® ® ® ® ® 1 1 9 1 1 9 1 1 9 1 1 9 1 1 9 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 110 1 2 0 1 2 0 1 2 0 1 2 0 1 2 0 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 111 1 2 1 1 2 1 1 2 1 1 2 1 1 2 1 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 112 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 113 4 3 2 1 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 114 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 ASRock N68-GS3 / N68-S3 Motherboard...
  • Page 115 ® ® ® 1 2 5 1 2 5 1 2 5 1 2 5 1 2 5 ASRock N68-GS3 / N68-S3 Motherboard...

This manual is also suitable for:

N68-s3