Chipset Configuration - ASROCK N7AD-SLI - V1.0 User Manual

Intel (R) SpeedStep(tm) tech.
Intel (R) SpeedStep(tm) tech. is Intel's new power saving technology. Proces-
sor can switch between multiple frequency and voltage points to enable power
savings. The default value is [Auto]. Configuration options: [Auto], [Enabled]
and [Disabled]. If you install Windows
the "Power Schemes" as "Portable/Laptop" to enable this function. If you
install Windows Vista
® TM
to [Enabled]. This item will be hidden if the current CPU does not support Intel
(R) SpeedStep(tm) tech..
Please note that enabling this function may reduce CPU voltage and lead to system
stability or compatibility issue with some power supplies. Please set this item to
[Disable] if above issue occurs.
3 . 4 . 2 3 . 4 . 2

Chipset Configuration

Chipset Configuration
3 . 4 . 2 3 . 4 . 2 Chipset Configuration 3 . 4 . 2 Chipset Configuration Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Configuration
DRAM Frequency
Flexibility Option
Memory Timings
Onboard LAN
Onboard IDE and 1394
Onboard HD Audio
Front Panel
Primary Graphics Adapter
CPU Voltage
DRAM Voltage
Chipset Voltage
VTT Voltage
GTLREF Voltage
Intelligent Energy Saver
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) in-
serted and assigns appropriate frequency automatically. You may select [Auto],
[333MHz (DDRII 667)], [400MHz (DDRII 800)] or [Manual].
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
Memory Timings
Use this item to select the Memory Timings feature. Configuration options:
[Auto] and [Manual]. If [Manual] is selected, you can adjust the following memory
timings.
Onboard LAN
This allows you to enable or disable the "Onboard LAN" feature.
XP and select [Auto], you need to set
®
and want to enable this function, please set this item
Options
[Auto]
Auto
[Disabled]
333MHz (DDRII 667)
[Auto]
400MHz (DDRII 800)
[Enabled]
Manual
[Enabled]
[Auto]
[Auto]
[PCI]
Select Screen
Select Item
[Auto]
+ - Change Option
[Auto]
F1 General Help
[Auto]
F9 Load Defaults
[Auto]
F10 Save and Exit
[Auto]
ESC Exit
[Disabled]
5 2 5 2 5 2
5 2 5 2