ASROCK N7AD-SLI - V1.0 User Manual page 22

Step 3. Reverse the card direction so as to have the "X8 / X8 MODE" wording side
toward the retention slot base. Insert the card into the bottom of the base.
Step 4. Push the card down into the retention slot till both the retention arms firmly
hold the card into position. Also, keep away from touching the connectors
(Golden Fingers).
Step 5. Install the identical SLI
cause different types of graphics cards will not work together properly. (Even
the GPU chips version shall be the same.) Insert one graphics card into PCIE2
slot and another graphics card to PCIE4 slot. Make sure that the cards are
properly seated on the slots.
Step 6. If required, connect an auxiliary power source to the PCI Express graphics
cards.
Step 7. Align and insert ASRock SLI_Bridge_2S Card to the goldfingers on each graphics
card. Make sure that ASRock SLI_Bridge_2S Card is firmly in place.
-ready graphics cards that are NVIDIA
TM
2 2 2 2 2 2
2 2 2 2
certified be-
®