ASROCK N7AD-SLI - V1.0 User Manual page 35

How to install eSATAII?
SATAII_6 (Port 5)
1. In order to enable the eSATAII port of the I/O shield, you need to connect the
orange SATAII connector (SATAII_6 (Port 5); see p.11 No.12) and the eSATAII
connector (eSATAII_TOP; see p.11 No.38) with a SATA data cable first.
Connect the SATA data cable
to the orange SATAII
connector
(SATAII_6 (Port 5))
2. Use the eSATAII device cable to connect eSATAII device and the eSATAII port of
the I/O shield according to the eSATAII connector that you connect the SATA
data cable.
Connect one end of the eSATAII
device cable to eSATAII device
eSATAII_TOP
Connect the
SATA data cable
to the eSATAII
connector
(eSATAII_TOP)
Connect the other end of the eSATAII device cable
to eSATAII port of the I/O shield
3 5 3 5 3 5
3 5 3 5