Pcipnp Configuration - ASROCK K8NF4G-SATA2 R2.0 User Manual

S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis,
and Reporting Technology) feature. Configuration options: [Disabled], [Auto],
[Enabled].
32Bit Data Transfer
Use this item to enable 32-bit access to maximize the IDE hard disk data
transfer rate.
3.3.5 3.3.5

3.3.5 PCIPnP Configuration

3.3.5 3.3.5 PCIPnP Configuration PCIPnP Configuration PCIPnP Configuration PCIPnP Configuration
BIOS SETUP UTILITY
Advanced
Advanced PCI / PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
PCI Latency Timer [64]
[Enabled]
PCI IDE BusMaster
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Setting wrong values in this section may cause
the system to malfunction.
PCI Latency Timer
The default value is 32. It is recommended to keep the default value unless
the installed PCI expansion cards' specifications require other settings.
PCI IDE BusMaster
Use this item to enable or disable the PCI IDE BusMaster feature.
Value in units of PCI
clocks for PCI device
latency timer
register.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
3 2 3 2 3 2 3 2 3 2