ASROCK K8 COMBO-Z User Manual page 25

Cool 'n' Quiet
Use this item to enable or disable AMD's Cool 'n' Quiet
Processor Maximum Multiplier
It will display Processor Maximum Multiplier for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Multiplier and Processor Voltage. However, it is recom-
mended to keep the default value for system stability.
Advanced
CPU Configuration
CPU Host Frequency
Actual Frequency (MHz)
Spread Spectrum
Cool' n' Quiet
Processor Maximum Multiplier
Processor Maximum Voltage
Multiplier/Voltage Change
Processor Multiplier
Processor Voltage
Memory Clock
Flexibility Option
Bank Interleaving
Burst Length
CAS Latency (CL)
TRCD
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
Cool' n' Quiet
Processor Maximum Multiplier
Processor Maximum Voltage
Multiplier/Voltage Change
Processor Multiplier
Processor Voltage
Memory Clock
Flexibility Option
Bank Interleaving
Burst Length
CAS Latency (CL)
TRCD
TRAS
TRP
MA Timing
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
BIOS SETUP UTILITY
[Auto]
[200]
[Disabled]
[Enabled]
x11
1.550 V
[Manual]
[x8]
[1.500V]
[Auto]
[Disabled]
[Auto]
[8 Beats]
[Auto]
[Auto]
BIOS SETUP UTILITY
[Enabled]
x11
1.550 V
[Manual]
[x8]
[1.500V]
[Auto]
[Disabled]
[Auto]
[8 Beats]
[Auto]
[Auto]
[Auto]
[Auto]
[2T]
TM technology.
If AUTO, FID/VID will
be left at the rated
frequency/voltage. If
Manual, FID/VID will
be set based on User
Selection in Setup.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
Select DRAM commands
and address timing.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit