BLUM SERVO-DRIVE uno Manual page 5

Structural changes and spare parts
Structural changes and spare parts not approved by the manufacturer
have an adverse effect on the safety and functionality of
SERVO-DRIVE and therefore are not allowed.
• Only use original spare parts from Julius Blum GmbH
• SERVO-DRIVE components are the only devices that should be
connected to the SERVO-DRIVE transformer.
• Only qualified specialists may install or replace
SERVO-DRIVE components, modify the position of the
SERVO-DRIVE transformer or modify the cabling.
• Please make sure that the Blum distance bumper is attached
to the front.
NOTE
To ensure that drawers cannot be activated unintentionally, we rec-
ommended connecting the SERVO-DRIVE transformer to a switched
outlet.
For more information, please consult an electrician.
SERVO-DRIVE uno
Instruction leaflet
EN
5