Epilog Laser Legend 36EXT Manual page 5

b. Push the belt through the motor covering,
making sure the belt loops around the silver
spindle.
c. Pull the belt close to the I-beam, making sure
to pull the belt to the inside of the white-red
ribbon cord.
White
Ribbon
Cord
d. Loop the belt around both of the black spindles
and back toward the laser head.
e. Put each end into its respective end of the
clamp, twisting the hexagonal screws to tighten
the clamp.
12. Loosen the screws holding the right side pulley,
letting the belt become tight. When the spindle
Pull belt
through
this slot
Loop
around
silver
spindle
Pull
belt
against
the I-
Beam