Epilog Laser Legend 36EXT Manual page 2

4. Remove the blue cover on the I-beam.
attached to the I-beam by five hexagonal screws in
the front and five Philips head screws in the back.
a. Use the 7/64 Allen wrench to take out the front
screws.
Front of I-Beam
b. There are several different Philips head screws
in the back of the I-beam. Only remove the
screws directly attached to the I-beam. The
smaller screws found in the center and the left
side of the I-beam can be left alone.
This cover is