Extech Instruments IAQ320 User Manual page 13

7
Data Logger
7.3 Configuring the Data Logger
Set the options in the Configuration window and click SAVE to prepare for da-
ta logging. The numbered list, below, references the numbered items in the
accompanying screen shot.
1. Click the Language that will be used for the data log report files.
2. Set the Sampling rate. This is the rate at which readings will be captured
(from 1 minute to 2 hours).
3. Set the Start Delay time (interval of time that the meter waits, after the
start button
4. Custom ID (optional four–digit code that gives each logger a unique
identifier).
5. Click SAVE to store the configuration and to synchronize the PC time zone
with the meter.
6. Click Cancel to abort the configuration.
7. After logging, when downloading data, track the download progress on
this bar.
8. After logging, return to this window and tap Data Download to download
the readings to PC.
After configuring the data logger, eject the data logger by right-clicking the
PDF Logger drive on the PC and selecting Eject. Physically disconnect the
meter from the PC by first disconnecting the USB cable from the PC and then
the meter.
#NAS100144; r. AC/95652/95652; en-US
is pressed, before logging begins).
11