Emerson Fisher FIELDVUE DPC2K Quick Start Manual page 5

Quick Start Guide
D104559X012
- It is recommended that you set the Write Lock switch in the enabled position after configuration is complete.
- Operate the device within a controlled and secured physical environment.
- When connected to a network, operate the DPC2K and LoopConnect software within a controlled and secured
network environment.
- Configure security settings of the DPC2K, providing access to only what is absolutely required to perform
configuration and operational functions.
- Apply security patches and updates as they are released.
Note
Work with your Emerson sales office
D Report security incidents and potential product vulnerabilities at:
https://go.emersonautomation.com/reportvulnerability_en
D Product Disposal Guidelines
When the device needs to be disposed of consider the following aspects of device removal:
- Identify whether the device can be reused in another part of the process or for testing or training purposes.
- Identify what data is stored on the device and sanitize this data with the latest industry recommended methods.
To restore the device back to factory defaults:
1. Using LoopConnect navigate to the Device Data Tab.
2. Select "Restore Factory Defaults" and follow on screen instructions.
If the device will not be reused, follow local disposal policy.
To uninstall LoopConnect software from your computer go to Start > Settings > Apps > Apps & features and select
LoopConnect.
to stay informed and obtain access to security patches and updates.
DPC2K Digital Process Controller
April 2024
5