Operational Check - Assa Abloy Corbin Russwin SN Series Installation Instructions Manual

Installation Instructions
SN200/210 ED5000 Series Exit Device
With MELR
Wiegand Test Unit
The ASSA ABLOY Wiegand Test Unit verifies your installation in the field*.
The test unit checks for:
• proper wiring
• card reader data integrity
• lock functionality including lock/unlock, door position status, and
request-to-exit (REX) status
In addition, this tool provides demonstration abilities to highlight the
product's features and capabilities**.
Wiegand Test Unit - WT1
Wiegand Test Unit - WT2
The SNT1 is an adapter harness assembly that connects and converts
OSDP lock signaling to work with a Wiegand Test Box (WTB).
If using the OSDP adapter, the WT1 will unlock on credential read or any key press,
regardless of what credential is learned (OSDP reader only).
When connected to a Wiegand reader or using OSDP adapter: the WT2 will unlock on
credential read and display credential value. Credentials can be learned, as usual.
Individual key press will be displayed for any key press, but they cannot be learned.
Copyright © 2020-2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights
reserved. Reproduction in whole or in part without the express written permission of
ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

9) Operational Check

*For directions on use, see operating instructions provided with unit.
**SN200/210 keypad version works only with WT2
WT2 unit with 1.03 firmware or later is required
†
25
Feature
12 or 24VDC solenoid lock
voltage adjustable
Operates as Fail Safe or Fail
Secure
"Learn" mode allows testing of
specific cards without program-
ming at panel level
Card reader data integrity is
validated at test unit
Displays detailed Wiegand data,
including hexadecimal string
and total bits received
Displays measured end-of-line
resistor values (if applicable)
Displays key-press data from
keypad readers
†
(SNT1) WTB OSDP adapter wiring harness
WT1 WT2
X X
X X
X X
X X
X
X
X