Assa Abloy Corbin Russwin SN Series Installation Instructions Manual page 21

Exit device with melr

Hide thumbs Also See for Corbin Russwin SN Series:

Table of Contents

Installation Instructions

SN200/210 ED5000 Series Exit Device

With MELR

12. Install Mounting Plate and (optional) Fire Plate:

a. NOTE: For fire-rated doors only. Secure mounting plate and fire plate using (2) #8 1-1/4" Phillips pan

head self-drilling screws provided (Fig. 12a). Ensure wires from reader are properly routed under flap

of fire plate.

b. Secure mounting plate using (2) remaining Phillips flat head self-drilling screws provided. Ensure

wires from reader are properly routed under flap of fire plate.

c. Place ground wire eyelet between upper right mounting plate hole and screw when securing mount-

ing plate (and fire plate if used) to door (Fig. 12a, b).

Configuration for Rim/CVR/Mortise

Configuration for SVR

Fig. 12c

reserved. Reproduction in whole or in part without the express written permission of

ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

6) Installation Instructions (Continued)

FIre

Plate

Ground

wire

Mounting

Screws

Fig. 12a

For non-fire rated door, use #8-5/8" Phillips pan

head screws (no fire plate required).

Ground

wire

Fig. 12b Detail

Table of Contents

Need help?

Do you have a question about the Corbin Russwin SN Series and is the answer not in the manual?