Assa Abloy Corbin Russwin SN Series Installation Instructions Manual page 12

Reader Backplate and (Optional*) Fire Shield
3. Install
For fire-rated doors only, install reader backplate and fire shield to door using two (2) #8-18 x 5/8" Phillips
flat head self-drilling screws (Fig. 3a, b).
Outside Face
of Door
Reader
Backplate
6) Installation Instructions (Continued)
Fig. 3a
SN200/210 ED5000 Series Exit Device
(for fire-rated doors)
(2) #8 x 5/8" Phillips flat
head self-drilling screws
Copyright © 2020-2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights
12
reserved. Reproduction in whole or in part without the express written permission of
ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Installation Instructions
With MELR
Fig. 3b