Advertisement
A.
Compress the locking tabs to the hood and slide the hood down
simultaneously to release the hood and
remove.
C.
Open the front storage
compartment,
remove the (4) push pins and
(2) T20 Tone
screws.
E. Pull the driver and passenger side panels off the Ryker.
B. Use a 10mm socket to disconnect the negative battery terminal.
D.
Slide back the fuel
door.
Remove the (4) push pins that are now
exposed.
F. Using a panel tool, release the clips for the trim panel from the
storage compartment.
2
Advertisement
Need help?
Do you have a question about the MRB3 and is the answer not in the manual?