Advertisement
Y
.
From the exterior of the storage compartment, place (2) push pins on
each side to mount the MRB3 in
place.
A1. Hold the center cover onto the front of the RKR-2K, faste·n the (2) M3
machine screws into the system to retain the cover.
©
2019 SSV
Works,
Oxnard,
CA 93030
RKR-2K
Rev.
A
11-19-19
Z. Place the storage compartment back into its cavity.
B1. Support the top of the center cover of the system and fasten the
(2) #4 coarse threaded screws to into the unit to complete cover
installation. Test the system prior to reassembly of the vehicle.
6
Advertisement
Need help?
Do you have a question about the MRB3 and is the answer not in the manual?