Oc Tweaker Screen - ASROCK AD410PV - V1.0 User Manual

3.3 3.3 OC T 3.3 3.3 3.3 OC T OC Tweak OC T OC T weak weak weak weaker Screen er Screen er Screen er Screen er Screen
In the OC Tweaker screen, you can set up overclocking features.
Main OC Tweaker Advanced
OC Tweaker Settings
Load CPU EZ OC Setting
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Boot Failure Guard
Spread Spectrum
DRAM Frequency
DRAM Timing Control
VCORE Voltage
VCCM(DRAM) Voltage
+1.05V Voltage
+1.5V Voltage
Would you like to save current setting as
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Load CPU EZ OC Setting
You can use this option to load CPU EZ overclocking setting. Configuration
options: [Press Enter], [1.80 GHz], [1.90 GHz] and [2.00 GHz]. Please note
that overclocing may cause damage to your CPU and motherboard. It
should be done at your own risk and expense.
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configura-
tion options: [Auto], [CPU, PCIE, Sync.], [CPU, PCIE, Async.] and [Optimized].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
This item should always be [Auto] for better system stability.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may select
[Auto], [333MHz DDR2_667] and [400MHz DDR2_800].
BIOS SETUP UTILITY
H/W Monitor Boot Security
Overclocking may cause
damage to your CPU and
[Press Enter]
motherboard.
It should be done at
[Auto]
[166] your own risk and
expense.
[100]
[Enabled]
[Auto]
[Auto]
Select Screen
Select Item
[Auto]
Enter Go to Sub Screen
[Auto]
F1 General Help
[Auto]
F9 Load Defaults
[Auto]
F10 Save and Exit
ESC Exit
Exit
2 9 2 9 2 9
2 9 2 9