Table of Contents
Advertisement
2.8
2.8
2.8
Serial A
Serial AT T T T T A (SA
Serial A
A (SAT T T T T A) / Serial A
A (SA
A (SA
2.8
2.8
Serial A
Serial A
A (SA
Installation
Installation
Installation
Installation
Installation
This motherboard adopts Intel
Serial ATA (SATA) / Serial ATAII (SATAII) hard disks. You may install SATA / SATAII
hard disks on this motherboard for internal storage devices. This section will
guide you to install the SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
2.9 Hot Plug F
2.9 Hot Plug F
2.9 Hot Plug Function for SA
unction for SAT T T T T A / SA
unction for SA
unction for SA
2.9 Hot Plug F
2.9 Hot Plug F
unction for SA
This motherboard supports Hot Plug function for SATA / SATAII Devices in AHCI
mode. Intel
®
NM10 Express south bridge chipset provides hardware support for
Advanced Host controller Interface (AHCI), a new programming interface for SATA
host controllers developed thru a joint industry effort. AHCI also provides usability
enhancements such as Hot Plug.
NOTE
What is Hot Plug Function?
If the SATA / SATAII HDDs are NOT set for RAID configuration, it is called
"Hot Plug" for the action to insert and remove the SATA / SATAII HDDs
while the system is still power-on and in working condition.
However, please note that it cannot perform Hot Plug if the OS has been
installed into the SATA / SATAII HDD.
2 0
2 0
2 0
2 0
2 0
A) / Serial A
A) / Serial AT T T T T AII (SA
A) / Serial A
AII (SA
AII (SAT T T T T AII) Hard Disks
AII (SA
A) / Serial A
AII (SA
®
NM10 Express south bridge chipset that supports
A / SAT T T T T AII HDDs
A / SA
A / SA
AII HDDs
AII HDDs
AII HDDs
A / SA
AII HDDs
AII) Hard Disks
AII) Hard Disks
AII) Hard Disks
AII) Hard Disks
Advertisement
Table of Contents
