Table of Contents
Advertisement
4.3 OC Tweaker Screen
In the OC Tweaker screen, you can set up overclocking features.
Because the UEFI software is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.
CPU Configuration
SOC Voltage(VID)
Configure the voltage for the VID-requested SOC supply level.
SMT Mode
This item can be used to disable
power cycle is needed after selecting [Auto].
Warning: S3 is not supported on systems where SMT is disabled.
DRAM Timing Configuration
DRAM Information
Browse the serial presence defect (SPD) for DDR4 modules.
symmetric multithreading. To re-enable SMT, a
X300M-STX
33
Advertisement
Table of Contents
