Page 1
H4OO 使用说明书/USER MANUAL 本说明书的内容可能会随版本更改,如有变动, 恕不另行通知 Ver 1.0 The contents of this manual may be changed with the edition, and are subject to change without notice.
Dismantling, refitting, repairing by user in private. Causing damage by using some fittings instead of the designative or accredited ones. Cannot provide credible proof of purchase. 4.Sending it back to our company for repairing. 5.Contact your S.M.S.L Audio reseller for a return or replacement.
Page 10
H4OO Features Fully balanced discrete design for ultra-high power output. The distortion is as low as 0.00006%, and the SNR is as low as 133dB! High output power, 16 ohm output power up to 15W, 32 ohms up to 7.5W; Relay Switching Volume attenuator,...
H4OO Remote control If the remote control is still ineffective when it is close to the machine, replace it with a new battery. If the user does not use the remote control for a long time, remove the battery of the remote control. Dispose of used batteries in accordance with local regulations on battery disposal.
Page 13
H4OO Display Interface and Instructions 4.4mm headphone jack 6.35mm headphone jack Balanced headphone jack Knob Remote window Indicator light XLR Pre-output Display XLR balanced input RCA Pre-output Grounding pillar RCA input USB upgrade port Grounding control switch AC IN (100V-240VAC) Indicator status instruction: Red light for standby mode,Red flashing light for system protection mode.
H4OO Instructions NPUTS SOURCE XLR INPUT RCA INPUT PUTS SOURCE PRE OUT HEADPHONE VOLUME MODE REAL TIME (When the volume knob is turned quickly, the relay jumps step by step to the set volume.) SOFT (Volume relays will be changed at intervals to avoid over-frequent relay operation and to prolong relay life!) GAIN MODE LOW GAIN...
H4OO Instructions DIMMER SETTING 5 second ~ 60 second (The range is 5 seconds-60 seconds. After setting, the screen will automatically go off within this time, and the screen will re-light up if you operate the remote control or the knob at any time.) BRIGHTNESS 1-99%...
Need help?
Do you have a question about the H400 and is the answer not in the manual?
Questions and answers