Cpu Configuration - ASROCK 775VM800PRO-DDR2 User Manual

BIOS SETUP UTILITY
H/W Monitor
Main Advanced
Advanced Settings
WARNING : Setting wrong values in below sections
may cause system to malfunction.

CPU Configuration

Chipset Configuration
ACPI Configuration
IDE Configuration
PCIPnP Configuration
Floppy Configuration
SuperIO Configuration
USB Configuration
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Setting wrong values in this section may cause
the system to malfunction.
3.3.1 3.3.1 CPU Configuration 3.3.1 CPU Configuration CPU Configuration CPU Configuration
3.3.1 3.3.1 CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
CPU Host Frequency
Actual Frequency (MHz)
Boot Failure Guard
Spread Spectrum
Ratio Status : Locked
Ratio Actual Value : 16
Max CPUID Value Limit
'Intel (R) Virtualization tech.
CPU Thermal Throttling
No-Excute Memory Protection
Enhance Halt State
Hyper Threading Technology
Intel (R) SpeedStep(tm) tech.
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
CPU Host Frequency
While entering setup, BIOS auto detects the present CPU host frequency of
this motherboard. The actual CPU host frequency will show in the following
item.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
Select [Auto] for the spread spectrum feature.
Ratio Status
This is a read-only item, which displays whether the ratio status of this
motherboard is "Locked" or "Unlocked". If it shows "Unlocked", you will find
an item Ratio Setting appears to allow you changing the ratio value of this
motherboard. If it shows "Locked", then the item Ratio Setting will be hidden.
Boot Security
Configure CPU
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Select how to set the
CPU host frequency.
[Auto]
[200]
[Enabled]
[Auto]
Select Screen Select Screen
[Disabled]
Select Item Select Item
[Enabled]
+- +- Change Option Change Option
[Enabled]
F1 F1 General Help General Help
[Disabled]
F9 F9 Load Defaults Load Defaults
[Disabled]
F10 F10 Save and Exit Save and Exit
[Enabled]
ESC ESC Exit Exit
[Auto]
2 6 2 6
2 6 2 6 2 6
Exit