Installation Of Memory Modules (Dimm) - ASROCK 775VM800PRO-DDR2 User Manual

2.5 Installation of Memory Modules (DIMM)

2.5 Installation of Memory Modules (DIMM) 2.5 Installation of Memory Modules (DIMM)
2.5 Installation of Memory Modules (DIMM) 2.5 Installation of Memory Modules (DIMM)
775VM800Pro-DDR2 motherboard provides two 240-pin DDRII (Double Data Rate)
DIMM slots.
It is not allowed to install DDR into DDRII slot; otherwise, this motherboard
and DIMM may be damaged.
Please make sure to disconnect power supply before adding or removing
DIMMs or the system components.
Step 1. Unlock a DIMM slot by pressing the retaining clips outward.
Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break
on the slot.
The DIMM only fits in one correct orientation. It will cause
permanent damage to the motherboard and the DIMM if you
force the DIMM into the slot at incorrect orientation.
Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully
snap back in place and the DIMM is properly seated.
notch
break
notch
break
1 5 1 5
1 5 1 5 1 5