ASROCK 775VM800PRO-DDR2 User Manual page 19

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
power connector
USB 2.0 Header
(9-pin USB67)
(see p.9, No. 18)
Shared USB 2.0 Header
(9-pin USB4_5)
USB_PWR
(see p.9, No. 29)
Infrared Module Header
(5-pin IR1)
(see p.9, No. 28)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.9, No. 23)
(AUX1: see p.9, No. 24)
Front Panel Audio Header
(9-pin AUDIO1)
(see p.9, No. 22)
Please connect the black end of
SATA power cable to the power
connector on the drive. Then
connect the white end of SATA
connect to the power cable to the power
power supply
connector of the power supply.
USB_PWR
ASRock I/O Plus
P-7
P+7
6 ready-to-use USB 2.0 ports on
GND
DUMMY
the rear panel. If the rear USB
1
ports are not sufficient, this
GND
P+6
USB 2.0 header is available to
P-6
USB_PWR
support 2 extra USB 2.0 ports.
This USB4_5 connector is shared
1
with the USB 2.0 ports 4,5 on
USB_PWR
P-5 P-4
ASRock I/O Plus
P+5 P+4
the front panel USB ports by
GND GND
DUMMY
attaching the front panel USB
cable to this connector
(USB4_5), the USB ports 4,5 on
ASRock I/O Plus
to function.
This header supports an optional
IRTX
+5VSB
DUMMY
wireless transmitting and
receiving infrared module.
1
GND
IRRX
These connectors allow you
to receive stereo audio input
AUX-R CD-R
GND GND
from sound sources such as
GND GND
AUX-L
CD-L
a CD-ROM, DVD-ROM, TV
CD1
AUX1
tuner card, or MPEG card.
This is an interface for the front
GND
+5VA
panel audio cable that allows
BACKOUT-R
BACKOUT-L
convenient connection and
1
control of audio devices.
AUD-OUT-L
GND
AUD-OUT-R
MIC-POWER
MIC
1 9 1 9
1 9 1 9 1 9
TM
provides you
TM
. When using
TM
will not be able