Subscribe to Our Youtube Channel
Related Manuals for Dahua Technology CS4006-4GT-60
Summary of Contents for Dahua Technology CS4006-4GT-60
- Page 1 Ethernet Switch (Cloud Managed PoE Switch) Quick Start Guide ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V1.0.0...
-
Page 2: Foreword
Quick Start Guide Foreword General This manual introduces the installation, functions and operations of the cloud managed switch (hereinafter referred to as "the Device"). Read carefully before using the device, and keep the manual safe for future reference. Safety Instructions The following signal words might appear in the manual. - Page 3 Quick Start Guide All designs and software are subject to change without prior written notice. Product updates ● might result in some differences appearing between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation. There might be errors in the print or deviations in the description of the functions, operations ●...
-
Page 4: Important Safeguards And Warnings
Quick Start Guide Important Safeguards and Warnings This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using the device, and comply with the guidelines when using it. Transportation Requirements Transport the device under allowed humidity and temperature conditions. - Page 5 Quick Start Guide Do not place the device in a place exposed to sunlight or near heat sources. ● Keep the device away from dampness, dust, and soot. ● Put the device in a well-ventilated place, and do not block its ventilation. ●...
- Page 6 Quick Start Guide Do not unplug the power cord on the side of the device while the adapter is powered on. ● Use the device under allowed humidity and temperature conditions. ● Do not drop or splash liquid onto the device, and make sure that there is no object filled with ●...
-
Page 7: Table Of Contents
Quick Start Guide Table of Contents Foreword................................I Important Safeguards and Warnings......................III 1 Overview................................1 1.1 Introduction............................1 1.2 Features..............................1 2 Port and Indicator............................2 2.1 Front Panel............................. 2 2.1.1 Front Panel (4/8-port)........................2 2.1.2 Front Panel (16/24-port)......................3 2.2 Rear Panel...............................4 2.2.1 Rear Panel (4/8-port)........................ -
Page 8: Overview
Quick Start Guide 1 Overview 1.1 Introduction Cloud managed device is a layer-2 commercial device. With its long-distance PoE function, it can supply power to devices up to 250 meters away. The 4-port device has PoE orange port functions with the PoE power supply as high as 60 W, the 8-port and 16/24-port device has PoE red port functions with the PoE power supply as high as 90 W. -
Page 9: Port And Indicator
Quick Start Guide 2 Port and Indicator 2.1 Front Panel 2.1.1 Front Panel (4/8-port) The following figure uses an 8-port 100 Mbps cloud managed device as an example, and might differ from the actual product. Figure 2-1 Front panel (4/8-port) Table 2-1 Description of front panel (4/8-port) Name Description... -
Page 10: Front Panel (16/24-Port)
Quick Start Guide Name Description Link indicator. On: Connected to the Device. ● Off: Not connected to the Device. ● Uplink port status indicators Activity indicator. Flashing: Transmitting data. ● Off: Not transmitting data. ● PoE port status indicator. PoE port status On: Powered by PoE. -
Page 11: Rear Panel
Quick Start Guide Name Description Device debugging port. Console serial port Only supported by select models. On: Connected to device. ● PoE output power Off: Not connected to device. ● indicator Flashing: Transmitting data. ● On: Connected to the Device. ●... -
Page 12: Rear Panel (16/24-Port)
Quick Start Guide Table 2-3 Description of rear panel (4/8 port) Name Description Connecting GND. Normal GND connection of the Device guarantees device ● Ground terminal lightning protection and anti-interference. You must connect the GND cable before powering on the Device and power off the Device before disconnecting the GND cable. -
Page 13: Installation
Quick Start Guide 3 Installation Different installation methods suit for different models. Please select appropriate methods as needed. 3.1 Preparation Select an appropriate installation method as needed. ● Install the Device on a solid and flat surface. ● Leave around 10 cm of open space around the Device for heat dissipation and to ensure good ●... - Page 14 Quick Start Guide Screws do not come with the package. Purchase them as needed. ● Make sure that the distance between the screws is the distance between the wall- ● mount holes (77.8 mm for a 4-port switch and 128.4 mm for an 8-port switch). Step 2 Align the wall-mount holes on the back cover of the Device with the screws, and hang the Device on the screws.
-
Page 15: Wiring
Quick Start Guide 4 Wiring 4.1 Connecting GND Cable Background Information Normal GND connection of the Device is the important guarantee for Device lightning protection and anti-interference. Procedure Step 1 Remove the ground screw on the Device and place it properly. Pass the ground screw through the round hole of the OT terminal of the ground cable. -
Page 16: Connecting Sfp Ethernet Port
Quick Start Guide Figure 4-2 Ethernet port pin number Figure 4-3 Pin description The cable connection of RJ-45 connector conforms to the standard 568B (1-orange white, 2-orange, 3-green white, 4-blue, 5-blue white, 6-green, 7-brown white, 8-brown). 4.4 Connecting SFP Ethernet Port When installing the SFP optical module, do not touch the gold finger of the SFP optical module. -
Page 17: Connecting Poe Ethernet Port
Quick Start Guide Figure 4-4 Install SFP module Step 4 Remove the dust cap of the LC connector of the optical fiber and the dust plug of the SFP optical module. Step 5 Connect the LC connector of the optical fiber to the SFP optical module. Figure 4-5 Connect optical fiber 4.5 Connecting PoE Ethernet Port You can directly connect the Device PoE Ethernet port to the switch PoE Ethernet port through... -
Page 18: Initializing And Adding The Device
Quick Start Guide 5 Initializing and Adding the Device 5.1 Initializing the Device You can use DoLynk Care app to scan the QR code of the Device, and then add and initialize the ● Device when the Device is connected to Internet. You can log in to the webpage to initialize the Device and modify the IP address when the ●... - Page 19 Quick Start Guide You can scan the QR code to obtain the SN or manually enter the SN. Figure 5-2 Scan the QR code Select Switch and select a site, and then tap OK. Step 3 If there is no site, tap , and then select a site.
- Page 20 Quick Start Guide Select Me > HELP > User's_Manual in DoLynk Care for more details.
-
Page 21: Appendix 1 Security Commitment And Recommendation
Quick Start Guide Appendix 1 Security Commitment and Recommendation Dahua Vision Technology Co., Ltd. (hereinafter referred to as "Dahua") attaches great importance to cybersecurity and privacy protection, and continues to invest special funds to comprehensively improve the security awareness and capabilities of Dahua employees and provide adequate security for products. - Page 22 Quick Start Guide Service Configuration 1. Enable HTTPS It is recommended that you enable HTTPS to access Web services through secure channels. 2. Encrypted transmission of audio and video If your audio and video data contents are very important or sensitive, we recommend you to use encrypted transmission function in order to reduce the risk of your audio and video data being eavesdropped during transmission.
- Page 23 Quick Start Guide By viewing logs, you can learn about the IP addresses that attempt to log in to the device and key operations of the logged users. 3. Configure network log Due to the limited storage capacity of devices, the stored log is limited. If you need to save the log for a long time, it is recommended to enable the network log function to ensure that the critical logs are synchronized to the network log server for tracing.
Need help?
Do you have a question about the CS4006-4GT-60 and is the answer not in the manual?
Questions and answers
Можно ли использовать данное изделие в неотапливаемом помещении.