Webasto MultiControl Quick Start Manual page 3

Symbol Description Symbol Description
Back
Back
12 hour format 12 hour format
Operating voltage too low Operating voltage too low
Altitude correction Altitude correction
At temperatures below –20 °C protective function of control element display is active. At temperatures below –20 °C protective function of control element display is active.
Display and background illumination are switched off, heating status is indicated by Display and background illumination are switched off, heating status is indicated by
status of LED diode. The heater can be tuned on and off by quick start button without status of LED diode. The heater can be tuned on and off by quick start button without
any limits.
any limits.
5 Switching on and off by quick start button 5 Switching on and off by quick start button
"Quick start" function enables heating or ventilation by simply pressing the button. Ope- "Quick start" function enables heating or ventilation by simply pressing the button. Ope-
ration time, temperature and heating mode can be preset in the settings in menu item ration time, temperature and heating mode can be preset in the settings in menu item
"Setting the quick start". "Setting the quick start".
Press quick start button (5). Press quick start button (5).
X X
Heating or ventilation starts functioning. Heating or ventilation starts functioning.
The quick start button (5) lights up when the heater is in operation: The quick start button (5) lights up when the heater is in operation:
■ ■
Green (Heating)
Green (Heating)
■ ■
Blue (Ventilation)
Blue (Ventilation)
By pressing quick start button (5) heating or ventilation can be ended prematurely
By pressing quick start button (5) heating or ventilation can be ended prematurely
at any moment.
at any moment.
Symbol Description Symbol Description
To the right
To the right
Symbol for confirmation Symbol for confirmation
ADR display ADR display
6 Switching on and off through the menu 6 Switching on and off through the menu
Switching on the heating through the menu Switching on the heating through the menu
3 Heating menu 3 Heating menu has been selected in the main menu.
Press the control knob (6). Press the control knob (6).
X X
The heating level, required temperature and/or operation time must be set in The heating level, required temperature and/or operation time must be set in
accordance with the installed heater. Follow the instructions displayed in the accordance with the installed heater. Follow the instructions displayed in the
menu. menu.
You can select the setting by turning the control knob. You confirm You can select the setting by turning the control knob. You confirm
selection by pressing the control knob. selection by pressing the control knob.
The heating starts functioning as soon as all the settings have been chosen. The heating starts functioning as soon as all the settings have been chosen.
By pressing quick start button (4) heating can be ended prematurely at By pressing quick start button (4) heating can be ended prematurely at
any moment.
any moment.
Setting ventilation through the main menu (optional) Setting ventilation through the main menu (optional)
3 Ventilation menu 3 Ventilation menu has been selected in the main menu.
Press the control knob (6).
Press the control knob (6).
X X
The fan speed, required temperature and/or operation time must be set in
The fan speed, required temperature and/or operation time must be set in
accordance with the installed heater. Follow the instructions displayed in the
accordance with the installed heater. Follow the instructions displayed in the
menu.
menu.
You can select the setting by turning the control knob. You confirm
You can select the setting by turning the control knob. You confirm
selection by pressing the control knob. selection by pressing the control knob.
The ventilation starts functioning as soon as all the settings have been cho- The ventilation starts functioning as soon as all the settings have been cho-
sen. sen.
By pressing quick start button (5) during functioning, ventilation can be By pressing quick start button (5) during functioning, ventilation can be
ended prematurely at any moment. ended prematurely at any moment.
has been selected in the main menu.
has been selected in the main menu.
7 Timer 7
The function is n
tion).
3 3
Timer menu has Tim
Press the
X
"Add ti
appear
Press the co
X
In order to pro
day of the we
instructions di
As soon as set
and shown in
Press the co
X
timer.
"Activate" me
Press the co
X
All programmed times All pr
been selected in the m been
order. The following fu order
vate", "deactivate", "ed vate"