GUBI Gravity Floor Lamp XL Assembly Instructions

C A R E I N S T R U C T I O N S
Wipe the parts with a dry cloth or a damp cloth soaked in
warm water. Use only soft cloth for wiping and polishing,
never sponges or steel wool. Do not use abrasive household
cleaners. Do not use acidic or alkaline cleaning materials,
glass cleaner or household ammonia.
T R O U B L E S H O O T I N G
If lamp does not light, turn off the power. Check the bulb for a broken
filament. Replace bulb if necessary, then turn it on. If the lamp still
does not light, please contact customer service at the local dealer. If
the external flexible cable or cord of this lamp is damaged, it must be
replaced by a qualified electrician in order to avoid a hazard.
T E C H N I C A L I N F O R M A T I O N
Light sources: E27, 3 x 1100 Lumen (~10-12W LED Dimmable).
Max power: With LED you can improve light output to 1530 Lumen
(~13-16W).
Only dimmable light bulbs work properly.
Turn power off when changing light bulb. Isolation class II. The lamp is
not approved for outdoor use or use in damp/wet rooms (IP20).
D
For enquiries contact GUBI A/S - CVR: 17940384
Klubiensvej 7-9. 2150 Nordhavn. Copenhagen, Denmark
T +45 69 15 60 60 – order@gubi.com
GUBI.COM
69-20-007-03 Assembly Instructions Gravity Floor Lamp XL - Low EU.
AS S E MBLY I N ST RU C TIO N S
fo r
Gravity Floor Lamp XL - Low