GUBI Gravity Floor Lamp Assembly Instructions

Advertisement

C A R E I N S T R U C T I O N S
Wipe the parts with a dry cloth or a damp cloth soaked in
warm water. Use only soft cloth for wiping and polishing, never
sponges or steel wool. Do not use abrasive household cleaners.
Do not use acidic or alkaline cleaning materials, glass cleaner
or household ammonia.
T R O U B L E S H O O T I N G
If lamp does not light, turn off the power. Check the bulb for a broken
filament. Replace bulb if necessary, then turn it on. If the lamp still
does not light, please contact customer service at the local dealer. If
the external flexible cable or cord of this lamp is damaged, it must be
replaced by a qualified electrician in order to avoid a hazard.
T E C H N I C A L I N F O R M A T I O N
Light sources: E27, 3 x 1100 Lumen (≤ 75W Incandescent,
≤57W Halogen, ~10-12W LED Dimmable).
With LED you can improve light output to 1530 Lumen (~13-16W).
Only dimmable light bulbs work properly.
Turn power off when changing light bulb. Isolation class II. The lamp is
not approved for outdoor use or use in damp/wet rooms (IP20).
S A F E T Y I N S T R U C T I O N S
SAFETY INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR
PERSONAL INJURY!
WARNING: Lighted bulb gets HOT! Do not touch while on.
CAUTION: Keep lamp away from curtains, bedding linens, and any other flammable
materials. Do not look directly at lighted bulb. Turn off / unplug and allow lamp
to cool before replacing bulb, cleaning or other maintenance. Do not use in the
bathroom or damp places.
CAUTION: TO REDUCE THE RISK OF FIRE, USE ONLY TYPE A BULB, 120V 60Hz
AC ONLY. Do not exceed recommended wattage.
CAUTION! IMPORTANT: LAMP MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN!
For enquiries contact GUBI A/S - CVR: 17940384
Klubiensvej 7-9. 2150 Nordhavn. Copenhagen, Denmark
T +45 69 15 60 60 – order@gubi.com
GUBI.COM
69-20-004-02 Assembly Instructions Gravity Floor Lamp US.
AS S E MBLY I N ST RU C TIO N S
fo r
Gravity Floor Lamp

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Gravity Floor Lamp and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GUBI Gravity Floor Lamp

  • Page 1 CAUTION: TO REDUCE THE RISK OF FIRE, USE ONLY TYPE A BULB, 120V 60Hz AC ONLY. Do not exceed recommended wattage. CAUTION! IMPORTANT: LAMP MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN! For enquiries contact GUBI A/S - CVR: 17940384 Klubiensvej 7-9. 2150 Nordhavn. Copenhagen, Denmark T +45 69 15 60 60 – order@gubi.com GUBI.COM...
  • Page 2 A SSE MB LY I N STR UC TI O N S Insert 3 light bulbs and plug lamp to main voltage. Place the top diffuser on top of the shade so that it rests Slide button on foot dimmer to turn lamp on and off, and on the 3 rods.

Table of Contents