GUBI B-4 Assembly Instructions

C A R E I N S T R U C T I O N S
Wipe the parts with a damp cloth soaked in warm water and a bit of mild
detergent. Use only soft cloth for wiping and polishing, never sponges or
steel wool. Do not use abrasive household cleaners.
Do not use acidic or alkaline cleaning materials, glass cleaner or
household ammonia.
T R O U B L E S H O O T I N G
If lamp does not light, turn off the power. Check the bulb for a broken
filament. Replace bulb if necessary, then turn it on. If the lamp still
does not light, please contact customer service at the local dealer. If
the external flexible cable or cord of this lamp is damaged, it must be
replaced by a qualified electrician in order to avoid a hazard.
T E C H N I C A L I N F O R M A T I O N
Light sources: E26, max. 1x60W incandescent bulb. Turn power off
when changing light bulb. Isolation class II. The lamp is not approved for
outdoor use or use in damp/wet rooms (IP20).
S A F E T Y I N S T R U C T I O N S
SAFETY INSTRUCTIONS PERTAINING TO RISK OF FIRE,
ELECTRIC SHOCK, OR PERSONAL INJURY!
WARNING: Lighted bulb gets HOT! Do not touch while on.
CAUTION: Keep lamp away from curtains, bedding linens, and any
other flammable materials. Do not look directly at lighted bulb. Turn off
/ unplug and allow lamp to cool before replacing bulb, cleaning or other
maintenance. Do not use in the bathroom or damp places.
CAUTION: TO REDUCE THE RISK OF FIRE, USE ONLY TYPE A BULB,
MAX. 60 WATT, E26, 120V 60Hz AC ONLY.
Do not exceed recommended wattage.
CAUTION! IMPORTANT: LAMP MUST BE INSTALLED
BY A QUALIFIED ELECTRICIAN!
For enquiries contact GUBI A/S - CVR: 17940384
Klubiensvej 7-9. 2150 Nordhavn. Copenhagen, Denmark
T +45 69 15 60 60 – order@gubi.com
GUBI.COM
53-20-033-01 Mounting Instructions B-4 Table Lamp US.
AS S E MBLY I N ST RU C TIO N S
fo r
B-4 Table Lamp